Brembo disc and pad replacement
Moderators:MarkX, mike020150
I have a 2005 xkr 4.2s with the brembo brakes.(red calipers).The front discs have covered 44 000 miles and need replacing.Does anyone know of a cheaper disc and pad set up as the Brembo parts are extortionate.I need to know that they will be reliable and safe.I am not a heavy footed driver but still appreciate good stopping power.Thanks Paul
Re: Brembo disc and pad replacement
Always worth talking to Geoff Adams at Adamesh.
http://www.adamesh.co.uk/ebc-performanc ... -754-p.asp
Mike
http://www.adamesh.co.uk/ebc-performanc ... -754-p.asp
Mike
X350 Co-ordinator
2004 XJR
2004 XJR
Re: Brembo disc and pad replacement
There are plenty places to get replacement discs and pads expect to pay about £250 for both
http://www.jaguarpartsdb.com/index.cfm? ... 1&areaid=1
http://www.justjagsuk.com/products/0/Al ... model=X100
http://www.britishparts.co.uk/.sc/ms/ca ... --Brakes/2
http://www.kentjaguar.co.uk/
http://www.jaguarpartsdb.com/index.cfm? ... 1&areaid=1
http://www.justjagsuk.com/products/0/Al ... model=X100
http://www.britishparts.co.uk/.sc/ms/ca ... --Brakes/2
http://www.kentjaguar.co.uk/
-
mike020150

- Posts:3469
- Joined:Wed Feb 08, 2006 6:26 pm
Re: Brembo disc and pad replacement
I've looked closely at several replacement Brembo discs and noticed that they all appear to be the same casting as the originals. Bearing in mind the relatively small numbers of discs any single manufacturer could expect to sell, it would not be surprising if they were all to be made in the same factory! However, there's no guarantee the discs are made from identical material. I can say that I have used replacements from David Manners on my car and found them as good as the originals. Mike.
2014 XK Dynamic R convertible; 1977 Daimler Double Six Coupe; 2023 XE AWD 300S
Re: Brembo disc and pad replacement
Hi guys,thank you for your comments and recommendations.I now feel more confident on purchasing the correct replacement front discs and pads for my cherished car.I am taking her for an MOT tomorrow and will arrange to have new discs and pads fitted shortly.Happy motoring Paul.
Who is online
Users browsing this forum: No registered users and 2 guests
