Interior trim clips, lower half of "B" pillar

Moderators:Aceman, ecosselynx

richardhinds

Member
Posts:30
Joined:Tue May 17, 2016 4:07 pm
Interior trim clips, lower half of "B" pillar

Postby richardhinds » Fri Sep 01, 2023 5:22 pm

Hi All,

I'm after a source of the trim clips used on the lower half of the "B" pillar. These clips are different from the door card clips. I'm after two clips, to replace ones that are broken (rusted through?).
IMG_0169.jpeg
IMG_0170.jpeg
The one on the left is the type I'm after, the one on the right is a door card clip

Any advice gratefully received. Richard

Doherto

Member
Posts:212
Joined:Wed Jun 01, 2016 3:25 pm
Location:Manchester

Re: Interior trim clips, lower half of "B" pillar

Postby Doherto » Sat Sep 02, 2023 8:37 am

Richard, I have a few of the trim clips you need collected over the various projects. Happy to send them to you if you send me your address, best by pm, but need to send them on Monday before I go touring in France for two weeks. Hopefully you see this before then. Tony D.

richardhinds

Member
Posts:30
Joined:Tue May 17, 2016 4:07 pm

Re: Interior trim clips, lower half of "B" pillar

Postby richardhinds » Sun Sep 03, 2023 6:26 pm

Hi there,

Thank you for your reply and kind offer. My postal address is: R J Hinds, Tenby House, Mill Lane Ramsden heath, Billericay, Essex, CM11 1LX.

Please let me know your postal address, so I can send a little something back to you.

Regards, Richard

Doherto

Member
Posts:212
Joined:Wed Jun 01, 2016 3:25 pm
Location:Manchester

Re: Interior trim clips, lower half of "B" pillar

Postby Doherto » Sun Sep 03, 2023 7:10 pm

Richard, I have them wrapped and packed and will post them tomorrow. I have put a couple of spares in there too. No need for my details plenty in the club have helped me out over the years. No need for payment of any kind just do someone else a favour next time you get the opportunity. Tony D

richardhinds

Member
Posts:30
Joined:Tue May 17, 2016 4:07 pm

Re: Interior trim clips, lower half of "B" pillar

Postby richardhinds » Thu Sep 07, 2023 8:35 am

Tony,

I'm struggling to get a "p.m." to work. All received, and thank you very much. I hope you have a great holiday.

Richard


Who is online

Users browsing this forum: No registered users and 1 guest