Engineers For Classiscs
Moderator:jBlackwell
-
eastendjohn

- Posts:32
- Joined:Sun Jul 17, 2022 7:43 pm
The problem for owners in the rural community of owning a classic/aged Jaguar is finding a mechanic, I thing that would be generally agreed? This club and other makes of car remain reasonably well stocked with suppliers of parts as is clear from the advertisers in the club magazines. Has there been any discussion within JEC that would use the network of members through the power of the club that would encourage or even sponsor regional mechanics/garages, to keep alive the skills, for aged jag owners, that are being lost as time passes? Perhaps a sponsored apprenticeship approach that could take advantage of government employment initiative's in the rural communities. My home is in Galloway Scotland, that can only cater for car servicing; MOT's and tyres and only then if the car has a plug-in port! My car has a 60's 420G 4.2 engine with triple SU HD8 carbs and I would love to send somewhere for the engine to be fettled. Any recommendations would be very welcome as I have not yet managed to run the engine without severe backfire and uneven idle.
Re: Engineers For Classiscs
In my experience there is usually someone on here who can recommend local garages, I have a couple of good independent Jaguar garages locally, alas a bit far from Galloway though! Hopefully as you have put the shout out somebody can help.
Andy
XF Sportbrake 2020 / XK8 1998
XF Sportbrake 2020 / XK8 1998
-
eastendjohn

- Posts:32
- Joined:Sun Jul 17, 2022 7:43 pm
Re: Engineers For Classiscs
Thank you Andy I hope my message will spread within the clubs excellent forum. JEC has a remarkable record for keeping aging Jaguars on the road with parts, through various initiatives. I feel its timely that the club, in collaboration with other marks, focus on 'regional engineering capacity' as members and local garage knowledge of 'non computer driven' classics is noticeably fading!!! I am simply ringing an alarm bell possibly tolled by others before I joined?
As you have proffered sympathy, for which I thank you Andy, could you perhaps use your superior familiarity with the clubs feedback and notification systems to spread my dilemma/plea to other relevant sections of the club forum. I would be so grateful as I desperately long to be out on the road with my beautiful (head turning) but difunctional XK120 replica. Many thanks John
As you have proffered sympathy, for which I thank you Andy, could you perhaps use your superior familiarity with the clubs feedback and notification systems to spread my dilemma/plea to other relevant sections of the club forum. I would be so grateful as I desperately long to be out on the road with my beautiful (head turning) but difunctional XK120 replica. Many thanks John
Re: Engineers For Classiscs
Seems sensible, unfortunately I am a mere backbencher and not on the front seats, but I am sure someone who is could pick this idea up and run with it, maybe even a JEC 'stamp of approval' scheme for local garages?
Andy
XF Sportbrake 2020 / XK8 1998
XF Sportbrake 2020 / XK8 1998
-
eastendjohn

- Posts:32
- Joined:Sun Jul 17, 2022 7:43 pm
Re: Engineers For Classiscs
Thank you Andy. Even as "backbenchers" we can get the conversation going, I am amazed the idea is not at the top of the JEC agenda given we and the clubs reason for being is to keep our treasures on the road.
-
eastendjohn

- Posts:32
- Joined:Sun Jul 17, 2022 7:43 pm
Re: Engineers For Classiscs
It great to see how many new members have joined the Cumbria & Borders Solway Jaguar Region group in the past twelve months or so, including myself, though none from my neck of the woods 'Galloway'. I would so love to join them at a rally or two this year, though the prospect is at best doubtful! My Aristocat XK120 replica needs a mechanic that knows how to fettle an engine with triple carbs and there are none in my vicinity other than those with a gismo they plug-in to tell them which part to throw away. So as much as I would love to join you guys, I fear I may either have to remain a distant member or take the plunge and sell my dream Jag and move to a simple D.I.Y. MG or perhaps even a Moggy, heaven forbid. I kind-a wish I'd never bought it as things stand because she its just so good to look at, but what's the point if it just wont go?
Re: Engineers For Classiscs
Hi there, whilst I am not an aficionado of the older Jaguar models, I have been giving your plight some thought as I hate to think that someone had to get rid of a prized possession because they couldn't find someone to put it right. I have asked various contacts and have, like you, drawn a blank for "real mechanics" near you in Galloway.
The most obvious advice is to have your Aristocat trailered to someone like Ken Jenkins or David Marks, both of whom would have the skills and tools to complete your requirements. How much would it cost, probably less than you think, especially if you could hook up with a car delivery chap who may be returning south with an empty trailer. Typically, a man with a trailer costs about 80p per mile, so Galloway to Nottingham is not that much in the overall scheme of things.
Alternatively, you mention having to get a DIY Classic, such as an MG or Morgan, so perhaps you actually possess the skillset yourself, you just don't know it? The sequence to fettle your engine, complete with its triple carburettor setup is actually covered in the applicable manuals for your engine, but these pre-suppose that your engine is otherwise in standard trim.
It depends what has been done to the engine during the build / rebuild, e.g., electronic ignition, tuning alterations, etc. If the engine is standard then follow the procedure in the manual, first checking timing chain tension, valve clearances, ignition timing and so on, then refer to the service manual. The instructions are pretty easy to follow if a bit time consuming, so the key tool is patience but all well within the scope of an enthusiastic amateur home mechanic.
Good Luck
Jim Mann
The most obvious advice is to have your Aristocat trailered to someone like Ken Jenkins or David Marks, both of whom would have the skills and tools to complete your requirements. How much would it cost, probably less than you think, especially if you could hook up with a car delivery chap who may be returning south with an empty trailer. Typically, a man with a trailer costs about 80p per mile, so Galloway to Nottingham is not that much in the overall scheme of things.
Alternatively, you mention having to get a DIY Classic, such as an MG or Morgan, so perhaps you actually possess the skillset yourself, you just don't know it? The sequence to fettle your engine, complete with its triple carburettor setup is actually covered in the applicable manuals for your engine, but these pre-suppose that your engine is otherwise in standard trim.
It depends what has been done to the engine during the build / rebuild, e.g., electronic ignition, tuning alterations, etc. If the engine is standard then follow the procedure in the manual, first checking timing chain tension, valve clearances, ignition timing and so on, then refer to the service manual. The instructions are pretty easy to follow if a bit time consuming, so the key tool is patience but all well within the scope of an enthusiastic amateur home mechanic.
Good Luck
Jim Mann
Jim Mann
Banchory
Banchory
Who is online
Users browsing this forum: No registered users and 3 guests