1966 3.8S Vacuum pipe

Moderators:Aceman, ecosselynx

brent

Member
Posts:24
Joined:Wed Nov 29, 2017 10:49 am
1966 3.8S Vacuum pipe

Postby brent » Tue Mar 01, 2022 10:43 pm

Howdy all,

Hoping another S-type owner can help me out, there is a vacuum pipe that runs from the brake booster to a resevoir on the other side of the car. This was missing on mine and I managed to source a pipe but cannot figure out exactly where it should be attached.

Would anyone be able to help with advice or a photo?

Cheers!

brent

steve.pritchard146

Member
Posts:69
Joined:Sun May 05, 2019 9:44 am
Location:Calne

Re: 1966 3.8S Vacuum pipe

Postby steve.pritchard146 » Sun Mar 27, 2022 10:10 pm

Hi there, it runs along the front cross- member.
Mine is in very poor condition but I will try to get some pics tomorrow

Regards

Steve
Current:
2001 XKR silver, 2008 XJ Blue, 1986 Land Rover Defender, 1967 3.8S cream
Past:
S500, Porsche 944 Cab, Porsche 928 GT, porsche 944 Lux ,Volvo XC90,Volvo S80 T6,Jaguar XJS v12,Volvo C70,Mini R56 Cooper S,Land rover Discovery, Range Rover V8 HSE

steve.pritchard146

Member
Posts:69
Joined:Sun May 05, 2019 9:44 am
Location:Calne

Re: 1966 3.8S Vacuum pipe

Postby steve.pritchard146 » Mon Mar 28, 2022 1:35 pm

Ok here we go hopefully this is clear (just ignore all my rusty~ness! ) there are two small brackets attached with self tappers to the front cross member. Shout if it’s not clear and I can take more pics as I’m in the process of dismAntling and replacing the areas around this which will necessitate removing both the vacuum chambers.
Current:
2001 XKR silver, 2008 XJ Blue, 1986 Land Rover Defender, 1967 3.8S cream
Past:
S500, Porsche 944 Cab, Porsche 928 GT, porsche 944 Lux ,Volvo XC90,Volvo S80 T6,Jaguar XJS v12,Volvo C70,Mini R56 Cooper S,Land rover Discovery, Range Rover V8 HSE

steve.pritchard146

Member
Posts:69
Joined:Sun May 05, 2019 9:44 am
Location:Calne

Re: 1966 3.8S Vacuum pipe

Postby steve.pritchard146 » Mon Mar 28, 2022 1:36 pm

Hmm pics didn’t attach
Attachments
67488B86-BD6A-4F2C-92E9-35199D777528.jpeg
A392EC93-B20B-426A-896E-166D429C15FB.jpeg
B8451AE1-4387-440C-B688-29E041947BC5.jpeg
Current:
2001 XKR silver, 2008 XJ Blue, 1986 Land Rover Defender, 1967 3.8S cream
Past:
S500, Porsche 944 Cab, Porsche 928 GT, porsche 944 Lux ,Volvo XC90,Volvo S80 T6,Jaguar XJS v12,Volvo C70,Mini R56 Cooper S,Land rover Discovery, Range Rover V8 HSE

brent

Member
Posts:24
Joined:Wed Nov 29, 2017 10:49 am

Re: 1966 3.8S Vacuum pipe

Postby brent » Thu Mar 31, 2022 4:34 pm

Thanks Steve, that's fantastic, I think I can work out which end goes on which side as well now :)

steve.pritchard146

Member
Posts:69
Joined:Sun May 05, 2019 9:44 am
Location:Calne

Re: 1966 3.8S Vacuum pipe

Postby steve.pritchard146 » Fri Apr 01, 2022 8:05 am

No probs,
I’m very much in dismantle stage at the moment- trying to someone the courage to cut of the (remains of) the front cross member and various supporting stays, I will need to remove both vacuum tanks and many photographs are the only chance I have of remembering how everything fits!
Mine is an S-Type but happy to help if you need anything else
Current:
2001 XKR silver, 2008 XJ Blue, 1986 Land Rover Defender, 1967 3.8S cream
Past:
S500, Porsche 944 Cab, Porsche 928 GT, porsche 944 Lux ,Volvo XC90,Volvo S80 T6,Jaguar XJS v12,Volvo C70,Mini R56 Cooper S,Land rover Discovery, Range Rover V8 HSE

brent

Member
Posts:24
Joined:Wed Nov 29, 2017 10:49 am

Re: 1966 3.8S Vacuum pipe

Postby brent » Thu Apr 21, 2022 2:14 pm

Mine is an S as well :)

I wish I had the courage to do some welding, I removed the pipe today and will try and mount it properly now. The check valve on the vacuum cylinder came apart so I guess I now have something else to buy! :)

steve.pritchard146

Member
Posts:69
Joined:Sun May 05, 2019 9:44 am
Location:Calne

Re: 1966 3.8S Vacuum pipe

Postby steve.pritchard146 » Thu Apr 28, 2022 1:47 pm

yes the list of parts to buy is currently endless.
I'm trying to divide my car into project areas so as not to be overwhelmed by something dismantled never to be re-assembled.
Unfortunately to repair the area of the front chassis that is corroded I need to disassemble quite a bit...
Current:
2001 XKR silver, 2008 XJ Blue, 1986 Land Rover Defender, 1967 3.8S cream
Past:
S500, Porsche 944 Cab, Porsche 928 GT, porsche 944 Lux ,Volvo XC90,Volvo S80 T6,Jaguar XJS v12,Volvo C70,Mini R56 Cooper S,Land rover Discovery, Range Rover V8 HSE

B87UL

Member
Posts:47
Joined:Fri Sep 18, 2015 7:32 pm
Location:CAMBRIDGESHIRE

Re: 1966 3.8S Vacuum pipe

Postby B87UL » Fri Apr 29, 2022 1:04 pm

Brent
The tank on the opposite side to the brake booster is for the heating system controls, as you are probably aware.

It is some years since I re-piped the vacuum circuit on my S Type but in order to protect the brake booster vacuum I fitted two shut off valves in circuit adjacent to the brake booster. These were arranged to isolate either the brake booster vacuum or the heater vacuum and can be a very useful tool.

These enable me to isolate the system down stream of the brake booster, or the booster itself, if at any time the heater system vacuum, or booster became open circuit, by either tank leak, connection or valve failure.

The valves are useful if you suspect loss of vacuum is causing engine idling problems and need to isolate parts of the system. It is a cheap method of ensuring the brake vacuum circuit can always be secured, and also tested, and might be a consideration for you.

Memory is weak, but I seem to remember also replacing the steel front end cross feed pipes with correct type rubber vacuum hose. Be aware to use correct vacuum hose on these circuits, pressure type hose does not necessarily mean it is rated for vacuum.


Who is online

Users browsing this forum: No registered users and 2 guests