Hi Anyone
know of a suitable replacement brake switch which is more rhobust than the standard plastic.
Regards
Paul
Series 3 OTS 1972 Brake light switch
Re: Series 3 OTS 1972 Brake light switch
Hello Paul,
I'm not familiar with your car but I assume that rather than a hydraulic pressure switch, the brake light switch is actuated by the brake pedal?
If that is the case I would suggest that you look at industrial limit switches. They come in a variety of sizes and mounting options.
One website that keeps a large variety is RS-Components https://uk.rs-online.com. Just ensure the correct configuration of the contact if you see one that seems to be suitable. Either a change over configuration or a normally closed configuration.
Alec
I'm not familiar with your car but I assume that rather than a hydraulic pressure switch, the brake light switch is actuated by the brake pedal?
If that is the case I would suggest that you look at industrial limit switches. They come in a variety of sizes and mounting options.
One website that keeps a large variety is RS-Components https://uk.rs-online.com. Just ensure the correct configuration of the contact if you see one that seems to be suitable. Either a change over configuration or a normally closed configuration.
Alec
Mk 2 3.8 (long term restoration), MK1 Triumph 2.5 P.I. , 564 Hymer Motorhome
Who is online
Users browsing this forum: No registered users and 3 guests