Power Steering Pump Leak

Moderator:LJR

User avatar
Flappers

Member
Posts:85
Joined:Mon Nov 12, 2012 11:24 am
Location:Stockport
Contact:
Power Steering Pump Leak

Postby Flappers » Thu Apr 09, 2020 10:10 am

Hi all, I have a leak coming from the high-pressure hose assembly. Can anyone tell me if I can take the whole unit off and repair it with a kit, please? I'm having no luck searching for a kit to service the pump itself :?
Kind regards, Sam.
1989 Daimler Double Six
2002 STR

PaulGover

Member
Posts:824
Joined:Mon Jul 19, 2010 8:06 pm
Location:Near Banbury, England

Re: Power Steering Pump Leak

Postby PaulGover » Thu Apr 09, 2020 12:57 pm

AFAIK it's usually a very fine crack in the flared end of the hoses, so tightening only makes things worse. Seal kits for overhauling the pump certainly used to exist - typically a bunch of O rings, and a couple of aluminium fillers that replace the ones at the bottom of the screwed junctions to provide the mating surface for the flare.

Having done it, I don't recommend overhauling the pump unless you know there's a problem - it's hard to get the pump unit back in the housing - it's about 6" across and sealed with a matching O ring, but it's easy to nip it if the bits are mis-aligned. Just drain all the oil and refill with clean. The pumps seem to be very dependable. If there are small leaks, you might get away with adding a tin of any of the standard power steering oil treatments, though they're aimed more at the seals in the rack than the pipe ends and pump.

Otherwise it's a case of new hoses, which are expensive and I found hard to replace - very limited clearance for spanners at the pinion end. Theoretically a crows-foot adapter is needed to get the torque setting right, but I found my ones slipped of the nut despite being from a reputable manufacturer.
1986 XJ6 Sovereign Series III
1991 XJS V12 "facelift"
2021 I-Pace SE


Who is online

Users browsing this forum: No registered users and 1 guest