Ignition problems

Moderator:LJR

baptist907903
Posts:1
Joined:Sat Aug 03, 2019 4:06 pm
Ignition problems

Postby baptist907903 » Sun Aug 04, 2019 4:04 pm

Hiya guys and gals,

I'm a newbie in the world of jaguar and I have an issue with the ignition on it. Firstly I had to replace the engine cause the original one threw a piston and unfortunately I don't have time to get it sorted. Anyway got new engine in and ignition connected as it should be, but it won't start. So checked the ignition coil and there is no power going to it at all. We have replaced the points, distributer cap, condenser and still no power.

Can you advise on what we could do to investigate further?

Many thanks

John

PaulGover

Member
Posts:824
Joined:Mon Jul 19, 2010 8:06 pm
Location:Near Banbury, England

Re: Ignition problems

Postby PaulGover » Sun Aug 04, 2019 6:32 pm

It would be useful if you told use what sort of XJ you have age, engine size etc. As you say there's no power at the coil, I presume you have a voltmeter to hand. If not, get one - AFAIR Wilko shops have a decent digital meter for around £10. Do you have a workshop manual or wiring diagram? If so, examine the ignition circuit, and see how far the power is getting with the ignition switch on. Somewhere after that will be your break... (FWIW, none of the items you have replaced will affect the power to the coil - they're all "down wind" of it.)
1986 XJ6 Sovereign Series III
1991 XJS V12 "facelift"
2021 I-Pace SE

User avatar
piman
Posts:1183
Joined:Mon Oct 29, 2007 7:32 pm
Location:Oswestry

Re: Ignition problems

Postby piman » Mon Aug 05, 2019 9:44 am

Hello John,

when you switch the ignition switch, does the ignition warning light come on and do various ancilaries work, e.g. indicators and wipers, and fuel pump? This would indicate that there is power in and out of the ignition switch.
Generally the ignition feed (white wire) goes directly to the coil although it may pass to the fuse block first, the ignition itself is not fused but the white coil feed may feed the live side of the ancillary fuses.
Is the fuse block under the bonnet and could it have beeen disturbed during the engine installation?

Alec
Mk 2 3.8 (long term restoration), MK1 Triumph 2.5 P.I. , 564 Hymer Motorhome


Who is online

Users browsing this forum: No registered users and 2 guests