Fault on warning lights

Moderators:davidr, BigCatXJS, dhdove

DBTQR
Posts:2
Joined:Sun Jan 13, 2019 9:21 pm
Fault on warning lights

Postby DBTQR » Sun Jan 13, 2019 9:37 pm

Hello, first time that I writte about my XJS, manual 3.6. 44.000 original km. I am in Barcelona. All ok since purchased it 1 year ago. Today, the warning light of the handbrake did not turn off when releasing the handbrake. Stays on while driving. At the same time, when breaking, at that precise moment, the light warning light lights up. When lifting the pedal brake, the warning of position light, goes off. Otherwise, as I say, it drives normally. Any hint will be really appreciated.

User avatar
ng4xjs

Member
Posts:477
Joined:Thu Jul 29, 2010 12:49 pm

Re: Fault on warning lights

Postby ng4xjs » Wed Jan 23, 2019 8:58 pm

Hi DTBQR

Welcome to the forum. There is usually someone here that can help. The way you describe the fault I would guess the problem to be a combination of the handbrake release button not fully going back and the micro switch on the base of the handbrake leaver faulty or just out of adjustment. I believe the part from Jaguar is listed as NLA but it is a generic electrical component and should be easy to obtain.

Hope you get it sorted soon
Nick
1994 4.0 XJS AJ16 BRG
2009 2.2 X Type Diesel BRG
2007 4.2 X150 Silver

steve_m
Posts:1441
Joined:Mon Mar 02, 2009 11:46 am
Location:Wiltshire

Re: Fault on warning lights

Postby steve_m » Wed Jan 23, 2019 11:26 pm

Just make sure that you have fully released the handbrake.
It could be just some dirt in the handbrake micro switch that is not letting the system read that it has been released.
The light failure indication is to show you that are driving with handbrake on.

poprivet

Member
Posts:1985
Joined:Mon Jan 16, 2006 3:20 pm
Location:Hampshire
Contact:

Re: Fault on warning lights

Postby poprivet » Thu Jan 24, 2019 9:29 am

Worth checking the brake fluid level just in case the op is confusing the red handbrake warning light with the other red brake warning light.

If the handbrake microswitch is sticking, a squirt of contact cleaner into it should help.

DBTQR
Posts:2
Joined:Sun Jan 13, 2019 9:21 pm

Re: Fault on warning lights

Postby DBTQR » Thu Jan 24, 2019 9:00 pm

Thank you so much for your help. I will follow your advice and make some checks following your indications.

Regards, Aleandro


Who is online

Users browsing this forum: No registered users and 1 guest