Wanted: bonnet lining/insulation for 1996 Celebration Convertible
Moderators:davidr, BigCatXJS, dhdove
-
DavidCosham

- Posts:14
- Joined:Sat Jul 16, 2016 11:43 am
- Location:Somerset
Has anyone got one of these in good condition for sale? I've tried all the usual suspects, and had no luck. Any advice would be much appreciated
Thanks, David
David
New owner of 1996 XJS Celebration convertible
Looking forward to meeting and sharing interest in these wonderful cars
New owner of 1996 XJS Celebration convertible
Looking forward to meeting and sharing interest in these wonderful cars
Re: Wanted: bonnet lining/insulation for 1996 Celebration Convertible
I too would like a new liner, mine's for a '91 facelift; it's a black fibreglass mat shaped to fit. There seems to be nothing like it on the market. Kit car sundries supplies sell several self-adhesive foams that will probably do the job as well or better than the original. For example
Dodo Bonnet liner.
As they're almost always covered in aluminium foil, they'll look totally wrong. Many are "closed cell" foam, which I think is needed to prevent them saturating with petrol if there's a leak. ( I don't know if the original was proof against that!)
There are many American companies selling shaped "hood" liners made from what appears to be a dark grey felt. For example A liner for a Cutlass, whatever that is
Someone somewhere supplies rolls of the stuff, but I can't see anyone selling it, just car-specific fitted kits (and of course not for Jaguars).
Frost do a self-adhesive felt that doesn't look to good, but it might be possible to spray it with a suitable fireproof paint.
See here.
Some cheap high-temperature paint.
Dodo Bonnet liner.
As they're almost always covered in aluminium foil, they'll look totally wrong. Many are "closed cell" foam, which I think is needed to prevent them saturating with petrol if there's a leak. ( I don't know if the original was proof against that!)
There are many American companies selling shaped "hood" liners made from what appears to be a dark grey felt. For example A liner for a Cutlass, whatever that is
Someone somewhere supplies rolls of the stuff, but I can't see anyone selling it, just car-specific fitted kits (and of course not for Jaguars).
Frost do a self-adhesive felt that doesn't look to good, but it might be possible to spray it with a suitable fireproof paint.
See here.
Some cheap high-temperature paint.
1986 XJ6 Sovereign Series III
1991 XJS V12 "facelift"
2021 I-Pace SE
1991 XJS V12 "facelift"
2021 I-Pace SE
Re: Wanted: bonnet lining/insulation for 1996 Celebration Convertible
Mine has seen better days as well (pre-face lift). It has split at the points where it is attached to the bonnet along the top side (the end nearest the bulk head) and so is only held in place by two studs at the top side, the retaining disk, and those down either side of the bonnet. There is also damage where it rests above the fuel rails towards the front of the engine - almost if someone has deliberately hacked some of the insulation away to make space for something - most odd really.
If there is no real aftermarket option for bonnet linings for the XJS I wonder if these could be candidates for being added to the list of parts that Jaguar should consider re-introducing?
5.3 V12 (pre-facelift): BDC7973
3.6 (pre-facelift): BEC15591
I'm probably being a bit dim - but I cant see any bonnet linings for post-facelift cars under "Insulation/Liners" on the parts website - any pointers?
Ta, Rich
If there is no real aftermarket option for bonnet linings for the XJS I wonder if these could be candidates for being added to the list of parts that Jaguar should consider re-introducing?
5.3 V12 (pre-facelift): BDC7973
3.6 (pre-facelift): BEC15591
I'm probably being a bit dim - but I cant see any bonnet linings for post-facelift cars under "Insulation/Liners" on the parts website - any pointers?
Ta, Rich
1989 Jaguar XJ-S V12 HE 5-speed manual
1994 Jaguar XJ40 Sovereign
2003 Jaguar S-TYPE R
2006 Jaguar XJ Sovereign TDVi
2007 Mercedes CLK350 Convertible
2010 BMW E92 3 Series Coupe
Past:
1996 Daimler Six LWB
2004 Volvo S60 D5 (RICA 210bhp)
1985 E28 BMW M535
1994 Jaguar XJ40 Sovereign
2003 Jaguar S-TYPE R
2006 Jaguar XJ Sovereign TDVi
2007 Mercedes CLK350 Convertible
2010 BMW E92 3 Series Coupe
Past:
1996 Daimler Six LWB
2004 Volvo S60 D5 (RICA 210bhp)
1985 E28 BMW M535
Re: Wanted: bonnet lining/insulation for 1996 Celebration Convertible
Mine shows similar damage. I think what happened is vibration caused the lining to fret against the rubber seal on top of the radiator top mount, and then the cover splits and starts sagging into the area over the cooling fan. Then either threads get caught in the fan, or someone realizes the danger and hacks the drooping bits off to prevent a nasty whirling mat!...
There is also damage where it rests above the fuel rails towards the front of the engine - almost if someone has deliberately hacked some of the insulation away to make space for something - most odd really.
...
1986 XJ6 Sovereign Series III
1991 XJS V12 "facelift"
2021 I-Pace SE
1991 XJS V12 "facelift"
2021 I-Pace SE
Re: Wanted: bonnet lining/insulation for 1996 Celebration Convertible
I used automotive fabric adhesive to fix mine in position so that it no longer relies on the mickey mouse clips provided by Jaguar.
Robbie
Robbie
1996 4 litre XJS Celebration 2+2
Daimler Sovereign S1 4.2 1971
Daimler Sovereign S1 4.2 1971
Who is online
Users browsing this forum: No registered users and 2 guests
