Jaguar Tool Set - Spanner Missing

[franrca]

Hi All

Unfortunately I have misplaced a spanner from the Jag tool set having disconnected my battery - it's the one in the 1995 set between the 1/2 " and the tiny one - no doubt it will turn up when I don't need it, but in the meantime I'll need to get another as none of my non-Jag spanners appears to be the right size. Can you just let me know the size as I don't want to buy a whole set.

David/Paul - I'm thinking that you'll be able to help me on this one.

thanks very much

Richard

[cabriolet]

Hi,
In my 1986 set the smallest are 9 & 11 mil and 7/16 & 3/8.
Alan

[BigCatXJS]

Unfortunately I have misplaced a spanner from the Jag tool set having disconnected my battery - it's the one in the 1995 set between the 1/2 " and the tiny one - no doubt it will turn up when I don't need it, but in the meantime I'll need to get another as none of my non-Jag spanners appears to be the right size. Can you just let me know the size as I don't want to buy a whole set.

That's so OCD Rich - I bet this is causing you sleepless nights Do you recall if you dropped it down the side of the battery / spare wheel or did the spanner gremlins just steal it? Separately I had to be sedated the other morning when I discovered that someone had mixed-up the knives and forks on the hanging condiments rack...

[franrca]

ha ha, no it's a bit more than my being a tad OCD...i currently can't reconnect the battery without using my adjustable pliers, so not ideal.

[davidr]

The tool box for my Celebration went AWOL with a previous owner so I haven't even got one! That is causing me a bit of OCD!!

[franrca]

It's a 10mm!!!

[poprivet]

Sounds like it went metric on later cars like yours. I have a dedicated spanner for my battery terminals which is 1/4" Whitworth (the same as 5/16" BSF) which is a strange size at 13.34mm.

My '88 has a generous mix of AF and metric all over the place, which is fine if you have spanners and sockets of both kinds, the problems happen when less caring owners use the wrong one or worse an adjustable spanner and the edges get rounded off. As the saying goes, if you use a metric spanner and it slips you risk damaging your nuts

At work (Railway), Whitworth rules completely although even these vary as for the same thread, as they made the nut and bolt heads smaller during the war to save metal

[Mackie]

The tool box for my Celebration went AWOL with a previous owner so I haven't even got one! That is causing me a bit of OCD!!

I was thinking the very same thing of the previous owner of my car! I thought of trying to find the correct tool kit and I won't even use the bloody thing! Talk about anal!

[davidr]

The tool box for my Celebration went AWOL with a previous owner so I haven't even got one! That is causing me a bit of OCD!!

I was thinking the very same thing of the previous owner of my car! I thought of trying to find the correct tool kit and I won't even use the bloody thing! Talk about anal!

The tool kit for your car had gone missing before I got it 15 years ago!

[Mackie]

The tool box for my Celebration went AWOL with a previous owner so I haven't even got one! That is causing me a bit of OCD!!

I was thinking the very same thing of the previous owner of my car! I thought of trying to find the correct tool kit and I won't even use the bloody thing! Talk about anal!

The tool kit for your car had gone missing before I got it 15 years ago!

So, it was one with a tool kit? I wonder which part number?