Thank you
Octane type
Moderator:LJR
Thank you
Re: Octane type
Hello Lowebird,
I suggest you speak to VSE as they will know what compression pistons they fitted but I would expect that they will be the standard (8:1 ?) compression.
I would expect that you will not have any problems as long as you adjust the timing to avoid pinking. Do try and set the distributor to as near as Jaguar specification as possible, especially with regard to maximum advance. If you are not aware, excessive advance at higher RPM can cause serious and virtually undetectable damage to your engine until it's too late, i.e. you cannot hear it.
Alec
I suggest you speak to VSE as they will know what compression pistons they fitted but I would expect that they will be the standard (8:1 ?) compression.
I would expect that you will not have any problems as long as you adjust the timing to avoid pinking. Do try and set the distributor to as near as Jaguar specification as possible, especially with regard to maximum advance. If you are not aware, excessive advance at higher RPM can cause serious and virtually undetectable damage to your engine until it's too late, i.e. you cannot hear it.
Alec
Mk 2 3.8 (long term restoration), MK1 Triumph 2.5 P.I. , 564 Hymer Motorhome
Re: Octane type
Thank you Alec,
I will follow up on your advice.
Lowebird
I will follow up on your advice.
Lowebird
Who is online
Users browsing this forum: No registered users and 1 guest
