Help!! I have taken off my Stromberg carburetters (2) to remove the engine and gearbox from my E-Type 1970 series 2 2+2,in the process of fitting a new gearbox.
I am now in the process of refitting these carbs. Unfortunately I cannot remember where all the connections fit, springs etc, could anyone out there furnish me with a few photographs of their own layout, I would be most grateful.
Frank
stromberg carburetters refit
Re: stromberg carburetters refit
Do you have a manual? Should be shown in there.
Else, if you look on the SNGB parts website for your version E-type, there's often sufficient diagram to show the linkage positions.
HTH. Jerry
Else, if you look on the SNGB parts website for your version E-type, there's often sufficient diagram to show the linkage positions.
HTH. Jerry
JerryL
1970 E-Type S2 FHC. Dark Blue with Red interior. MX5 seats. Mazda MX-5 2.0l Sports car.
R/C flying models: Seagull DH88 Mosquito, SJM Xcalibur Jet Turbine, Flair Cub, Waco Biplane, Alula, Moth, Wizard Compact 2.5m composite glider.
1970 E-Type S2 FHC. Dark Blue with Red interior. MX5 seats. Mazda MX-5 2.0l Sports car.
R/C flying models: Seagull DH88 Mosquito, SJM Xcalibur Jet Turbine, Flair Cub, Waco Biplane, Alula, Moth, Wizard Compact 2.5m composite glider.
Re: stromberg carburetters refit
JerryL770.
Thank you for your advise, I have looked at quite a few drawings of these carbs, but they do not show in detail exactly what I am looking for,
Frank.
Thank you for your advise, I have looked at quite a few drawings of these carbs, but they do not show in detail exactly what I am looking for,
Frank.
Who is online
Users browsing this forum: No registered users and 0 guests