Removal and replacement of the sill trim

Moderators:MarkX, mike020150

User avatar
Bassman
Posts:85
Joined:Wed Aug 23, 2006 1:38 pm
Location:Addlestone, Surrey & Kerleit, Finistere

Postby Bassman » Thu Aug 21, 2008 11:30 am

Hi Painter
You will find a photo in the gallery section of this forum. Good luck.

Hi - could you point me in the direction of the GAllery?

I cannot see it anywhere!

At the top of the forum index page underneath the "WELCOME" bit it says XK8 GALLERY in blue highlighted in yellow that turns red when you hover over... click it :wink:

i.e.>>>>

Welcome Bassman You last visited on Thu Aug 21, 2008 1:55 am (All times on this BB are GMT)

.................................................................XK8 Gallery

Forum Index Showing All Sections | View posts since last visit | View all posts since week before last visit | View your posts
Paul
[b]1998 XK8 Antigua Blue[/b]

painter

Member
Posts:325
Joined:Sun Sep 02, 2007 3:28 am
Location:Cornwall

Postby painter » Thu Aug 21, 2008 9:30 pm

Hi BestGear,
go to the Bulletin Board and you will see a link for the XK8 gallery at top.
(I'm not going to look any more until I have found time to give mine a decent polish, the gallery is full of gleaming machines)

X300Sport
Posts:1
Joined:Fri Feb 10, 2006 9:26 pm

Postby X300Sport » Tue Jun 23, 2009 7:48 pm

Thanks for the heat gun tip chaps. I just completed this job with the aid of a strong magnet and each side came off perfectly in a couple of minutes.

Booked in with a local body shop tomorrow, hopefully the floor pan isn't perforated but at least it won't cost £40 a side to find out.

Fingers crossed. Thanks for the top tip.


Who is online

Users browsing this forum: No registered users and 2 guests