Does any body know how to re program the key fobs?
xj308 sovereign key fob
This does work,(X308 ONLY) and has done for me twice now:-
1. Unlock the Boot with key.
2. Turn Ignition on.(Take care NOT TO engage the starter)
3. Warning lights on dash comes on.(system check)
4. When system check lights go out, press the Valet button 5 times within 5 secs of lights on dash going out,( Horn may sound & Lights may flash.....may not.) Makes no difference anyway.
5. Press any button on remote, remote programmed.
Don't forget to shut the boot before trying to lock the car with the remote!
You may have to reprogramme any other keyfobs you may have straight away.
1. Unlock the Boot with key.
2. Turn Ignition on.(Take care NOT TO engage the starter)
3. Warning lights on dash comes on.(system check)
4. When system check lights go out, press the Valet button 5 times within 5 secs of lights on dash going out,( Horn may sound & Lights may flash.....may not.) Makes no difference anyway.
5. Press any button on remote, remote programmed.
Don't forget to shut the boot before trying to lock the car with the remote!
You may have to reprogramme any other keyfobs you may have straight away.
Reprogramming XJ8 remotes
Hi,
This Should Work:
You will need to have all the key ring transmitters for the vehicle being reprogrammed to hand. As a new set of instructions will be programmed on to the remotes, and any missing transmitters will not function with the vehicle.
1. Insert the ingition key (DO NOT TURN THE KEY)
2. HOLD the left hand column switch back (Headlamp flash posoition)
3. Turn the ignition key to the Auxiliary position (position 1)
4. Flash the headlamps four times (you will hear a short beep and the red LED security system warning lamp on the gear selector panel will be lit) the system is now in the programming mode.
5. release the left hand column switch (DO NOT REMOVE THE IGNITION KEY).
6. Press the lock or unlock button on the first transmitter to be programmed.
7. When you hear a short beep, the remote is programmed.
8. Repeat for each additional transmitter, up to five.
9. This must be done five times. so if you are programming two remotes you will need to press twice on the first and three times on the second, or any combination to make five.
10. Remove ignition key (you will hear a short beep to indicate the process is complete.
11 Test all the remotes.
This has worked for me on a variaty of XJ8's from 1997 to a 2001 Daimler super.
Good Luck, From Growler.
This Should Work:
You will need to have all the key ring transmitters for the vehicle being reprogrammed to hand. As a new set of instructions will be programmed on to the remotes, and any missing transmitters will not function with the vehicle.
1. Insert the ingition key (DO NOT TURN THE KEY)
2. HOLD the left hand column switch back (Headlamp flash posoition)
3. Turn the ignition key to the Auxiliary position (position 1)
4. Flash the headlamps four times (you will hear a short beep and the red LED security system warning lamp on the gear selector panel will be lit) the system is now in the programming mode.
5. release the left hand column switch (DO NOT REMOVE THE IGNITION KEY).
6. Press the lock or unlock button on the first transmitter to be programmed.
7. When you hear a short beep, the remote is programmed.
8. Repeat for each additional transmitter, up to five.
9. This must be done five times. so if you are programming two remotes you will need to press twice on the first and three times on the second, or any combination to make five.
10. Remove ignition key (you will hear a short beep to indicate the process is complete.
11 Test all the remotes.
This has worked for me on a variaty of XJ8's from 1997 to a 2001 Daimler super.
Good Luck, From Growler.
-
Brakebuster
- Posts:3145
- Joined:Tue Apr 18, 2006 1:17 pm
- Location:Gloucester UK
-
Brakebuster
- Posts:3145
- Joined:Tue Apr 18, 2006 1:17 pm
- Location:Gloucester UK
I have recently bought a 1998 4.0 V8 Sovereign. The key fob works, but needs about three presses on the button to lock/unlock, so I have purchased a new fob on eBay. Numbers on ORIGINAL fob are LJA2610BA; on NEW fob they are LJE2610-BC.
Does this mean I cannot program the new fob for my car? - and if the answer is "Yes", can someone tell me what model the new fob does fit, so that I can advertise it for sale?
Thanks,
Mike
Does this mean I cannot program the new fob for my car? - and if the answer is "Yes", can someone tell me what model the new fob does fit, so that I can advertise it for sale?
Thanks,
Mike
-
Brakebuster
- Posts:3145
- Joined:Tue Apr 18, 2006 1:17 pm
- Location:Gloucester UK
I have recently bought a 1998 4.0 V8 Sovereign. The key fob works, but needs about three presses on the button to lock/unlock, so I have purchased a new fob on eBay. Numbers on ORIGINAL fob are LJA2610BA; on NEW fob they are LJE2610-BC.
Does this mean I cannot program the new fob for my car? - and if the answer is "Yes", can someone tell me what model the new fob does fit, so that I can advertise it for sale?
Thanks,
Mike
it will not work on your car.....
different frequencies were used in different countries for local laws , it may well be from a 1998 XJ etc, but from France/America/Germay etc,
the only thing you can do is advertise it with the number code in the listing, and make it clear that it has to match their existing one to work
BB
Does this mean I cannot program the new fob for my car? - and if the answer is "Yes", can someone tell me what model the new fob does fit, so that I can advertise it for sale?
Thanks,
Mike
it will not work on your car.....
different frequencies were used in different countries for local laws , it may well be from a 1998 XJ etc, but from France/America/Germay etc,
the only thing you can do is advertise it with the number code in the listing, and make it clear that it has to match their existing one to work
BB
Who is online
Users browsing this forum: No registered users and 1 guest
