Heated windscreen - 25% of elements working
Posted: Mon Jan 05, 2009 7:50 pm
It's that time of year when it's handy to have the heated windscreen option. Even though I'm fortunate enough to have a car port which means I don't start each day by scarping or spraying, I don't always park at home.
I reckon only about 25% of my elements are working. I was about to lay out close to £300 on a new screen as a New Year's present to the car (and myself) when a helpful person at Autowindscreens suggested I first check the connections to the screen as the individual elements, being embedded in the glass and so not susceptible to physical damage, don't tend to fail that often.
Now I would have though that the connections would either be ok or not, and not "good enough to heat only some of the elements". But I'm happy to give this a shot if it might fix the problem and save me a substantial amount of dosh.
I understand that if you lift the bonnet and look under the guard at the back of the engine space the wires from the screen are visible 4" or so (that's 10cm in new money) in from each side but that I may need to remove a screw or two on the scuttle to get to the connection itself. (Thanks to David Marks garage for an extremely helpful 5-minute telephone call).
I'd appreciate:
(1) any comments on the likelihood of the connection being the problem and/or
(2) any advice on locating and checking the connection.
Thanks in anticipation!
Nigel
I reckon only about 25% of my elements are working. I was about to lay out close to £300 on a new screen as a New Year's present to the car (and myself) when a helpful person at Autowindscreens suggested I first check the connections to the screen as the individual elements, being embedded in the glass and so not susceptible to physical damage, don't tend to fail that often.
Now I would have though that the connections would either be ok or not, and not "good enough to heat only some of the elements". But I'm happy to give this a shot if it might fix the problem and save me a substantial amount of dosh.
I understand that if you lift the bonnet and look under the guard at the back of the engine space the wires from the screen are visible 4" or so (that's 10cm in new money) in from each side but that I may need to remove a screw or two on the scuttle to get to the connection itself. (Thanks to David Marks garage for an extremely helpful 5-minute telephone call).
I'd appreciate:
(1) any comments on the likelihood of the connection being the problem and/or
(2) any advice on locating and checking the connection.
Thanks in anticipation!
Nigel