Body Processing Module and car-alam light dim/on
Posted: Sat Sep 08, 2007 10:40 pm
Background:
I had a very annoying problem in that the car-alarm light sometimes comes on or is dim/flickering. If this happens when the ignition is off, it can make the car impossible to start. If it happens when the engine is on, some strange things happens, like the windshield wiper comes on for one stroke.
The problems seems to be bad earthing as the car-alarm light comes on when the BPM is removed from the car frame. I can also get the symptoms above when I "wiggle" the BPM somewhat while in situ.
Solution:
It turned out to be a bad soldering on one of the two earth points on the BPM PCB. The BPM had to be removed, opened up and then the two earth points re-soldered.
Conclusion:
A very annoying situation which I had for 4 years w/o solution but is now resolved.
I had a very annoying problem in that the car-alarm light sometimes comes on or is dim/flickering. If this happens when the ignition is off, it can make the car impossible to start. If it happens when the engine is on, some strange things happens, like the windshield wiper comes on for one stroke.
The problems seems to be bad earthing as the car-alarm light comes on when the BPM is removed from the car frame. I can also get the symptoms above when I "wiggle" the BPM somewhat while in situ.
Solution:
It turned out to be a bad soldering on one of the two earth points on the BPM PCB. The BPM had to be removed, opened up and then the two earth points re-soldered.
Conclusion:
A very annoying situation which I had for 4 years w/o solution but is now resolved.