Page 1 of 2
Exterior Window Trim
Posted: Thu Jan 04, 2007 9:37 pm
by MikeDoggart
Hi All.
I have an Anthracite Black coupe and the grey trim on the windows has a couple of small patches where the finish has flaked off. Does anyone know how I can make it good?
Regards, Mike.
Posted: Sun Jan 07, 2007 2:47 pm
by Sharfrs2
It's a common problem, but I haven't heard of any treatment other than buying new trim

Gun metal Grey , Window Trim
Posted: Mon Jan 08, 2007 4:51 pm
by peterdyer
Hi, Had a simular problem on my front windscreen surround. Got a body shop to , touch-up/respray, whilst carrying out another spray job. they did alright too. Could not see where they blended it in ! Hope this helps. Happy New Year. Peter Dyer.

Posted: Tue Jan 09, 2007 11:37 am
by MikeDoggart
Thanks guys. They are only tiny patches so I think I'll put up with it for the time being.
Posted: Tue Jan 09, 2007 11:27 pm
by GrandTourer
Hi Mike
the surrounds colour is called Dorchester Grey (don't know part no) and is available from Jaguar Dealers in a touch-up bottle kit form.
Posted: Wed Jan 10, 2007 12:03 pm
by MikeDoggart
Thanks Karl. Next stop - a Jaguar shop!
Mike.
Posted: Fri Aug 03, 2007 3:48 pm
by peterdpps
I know this is an old thread but I have the same problem, so I shall need to touch up the areas that have peeled. On a related note, it looks to me that the window trim surround is made of stainless steel. Was the XK8 coupe ever supplied with the trim 'bright' rather than painted as it is on the new XK? I think it would probably look good, particularly on a black car. Does anyone know of a supplier?
Posted: Fri Aug 03, 2007 4:40 pm
by GrandTourer
To my knowledge it has always been this colour.
I would also think, but not 100% sure, that the surround is actually aluminium, but I stand corrected if someone knows differently.
Posted: Mon Aug 06, 2007 8:48 am
by peterdpps
Yes, I dont think I have ever seen a UK car with Bright trim but as the US usually have slightly more 'bling' on their cars I wondered what it might be like. It could be aluminium rather than Stainless, i haven't looked that closely. It might mean a session with the touch up paint to bring up to standard.
Posted: Mon Aug 13, 2007 3:22 pm
by peterdpps
For anyone who has the 'peeling window trim syndrome' on their XK8 coupe I can share the following tip.
Buy an aerosol of Peugeot 'Graphite metallic' from Halfords.
Rub down, prime and spray and you will find it is a perfect match. Even on part lengths of trim you 'can't see the join'
Posted: Wed Aug 15, 2007 10:59 pm
by smurf
Thanks for that idea for a colour match, I too have one bad trim which needs some TLC. I'll take a look when in halfords

Posted: Fri Aug 17, 2007 6:16 pm
by D_Doran
Thanks for the advice re Halfords paint. I have a few areas on my 2002 Anthracite Black XK8 which need a bit of attention. I thought it may mean a complete trim replacement, but this may save a fortune, and if it isn't perfect it won't be the end of the world 'cos I'll only be back at the same stage of replacing the trim eventually. Thanks for a very worthwhile tip.
Damian

Posted: Sun Aug 19, 2007 6:54 pm
by XK8UK
Why use a different makers paint code when you can buy the correct 'Dorchester Grey' Jaguar colour from any good paint supplier (such as CARS) in aerosols, touch up or the full tin? Just don't see the point.
Bas
Posted: Thu May 21, 2009 7:22 pm
by cjrm1
Hi
Does anyone know how you remove the trim from the top of the door skin so that it can be replaced?
Thanks
Posted: Thu May 28, 2009 5:03 pm
by mike020150
Hi,
The trim piece unclips after removing the door mirror. Mike.