Workshop manual
Moderators:MarkX, mike020150
Can anyone advise the best place to obtain a comprehensive workshop manual to suit an XK8 4.0 in build December 1998 , registered March 1999. I need to replace the power latch hydraulic pipes ( 1 burst ! ) and it looks a mare of a job . I've no doubt I'll need a manual for many other jobs over the coming years ! 
Re: Workshop manual
Hi - I've nothing to offer in terms of a ROM but I will observe that the hydraulic fluid congealing is a known problem with these cars. I'm wondering if that is the cause of the burst pipes?
I would recommend changing the fluid and flushing the pipes through while you've got it all apart!
I would recommend changing the fluid and flushing the pipes through while you've got it all apart!
XJS FORUM COORDINATOR
1996 XJS Celebration Convertible 2001 XKR Convertible
Previously enjoyed!
1989 XJ-S V12 Coupe. 2006 XJ TDVi Sovereign. 1995 XJ6 3.2. 2013 XF 2.2d. 2009 X Type 2.0d Sovereign estate
1996 XJS Celebration Convertible 2001 XKR Convertible
Previously enjoyed!
1989 XJ-S V12 Coupe. 2006 XJ TDVi Sovereign. 1995 XJ6 3.2. 2013 XF 2.2d. 2009 X Type 2.0d Sovereign estate
Re: Workshop manual
Thanks David , however , the fluid was anything but congealed ! Rather more like gnats p ! The air temp was particularly hot at the time ! just need to know the best way to remove the pipe( s ) .
Re: Workshop manual
This link should answer most of your queries http://www.jagrepair.com/RoofHoseReplacement.htm
The host site for that article is www.jagrepair.com and is an invaluable source of technical information for many modern Jaguars.
The host site for that article is www.jagrepair.com and is an invaluable source of technical information for many modern Jaguars.
2005 XK8 4.2-S Coupe
2024 XE 300 Sport
2024 XE 300 Sport
Re: Workshop manual
Thanks for that info . I thought it was going to be a nightmare ! The only good thing was that , my roof was already in the lowered position !
How did you attach the old pipes to the new , tape or double male connectors ?
Regards ,
Mike .
How did you attach the old pipes to the new , tape or double male connectors ?
Regards ,
Mike .
-
Tonyinmeva

- Posts:22
- Joined:Thu Jun 22, 2017 11:56 am
Re: Workshop manual
Hi all, I would also like to get hold of a workshop manual for my 1998 XK8 coupe, I am about to change my tensioners , I have read all the post,s here and you tube so have a good idea , but having it in front of me whilst doing the job would be nice . a download or paperback.
Any ideas
thanks Tony..in Cornwall
Any ideas
thanks Tony..in Cornwall
-
mike020150

- Posts:3469
- Joined:Wed Feb 08, 2006 6:26 pm
Re: Workshop manual
Try this previous response to a similar query (viewtopic.php?f=62&t=6657#p31703). Mike.
2014 XK Dynamic R convertible; 1977 Daimler Double Six Coupe; 2023 XE AWD 300S
Re: Workshop manual
This is my most favourite document when it comes to V6 and V8 Jag engines. Worth book marking or downloading for future reference.
http://www.google.co.uk/url?sa=t&rct=j& ... NwdrKUf4YQ
Mike K
http://www.google.co.uk/url?sa=t&rct=j& ... NwdrKUf4YQ
Mike K
X350 Co-ordinator
2004 XJR
2004 XJR
Who is online
Users browsing this forum: No registered users and 9 guests
