Elbow Grease

Moderators:davidr, BigCatXJS, dhdove

steveww
Posts:157
Joined:Fri Jul 31, 2009 5:23 pm
Location:Northamptonshire
Contact:
Elbow Grease

Postby steveww » Mon Sep 14, 2009 8:15 pm

Does anyone know where I can get a large tub of elbow grease from?

My new XJS needs a good cut and polish from top to toe. So far I have done about half of the job and it feels like I will never finish. Next time I am buying a Mini, MG Midget, Lotus Elan anything small!

User avatar
MARKPEARSON

Member
Posts:157
Joined:Sat May 27, 2006 11:25 pm

Elbow Grease

Postby MARKPEARSON » Mon Sep 14, 2009 9:34 pm

Buy a convertible.....

Regards Mark :wink:

User avatar
dhdove

Member
Posts:1539
Joined:Wed Sep 14, 2005 1:00 am
Location:South Gloucestershire

Elbow Grease

Postby dhdove » Tue Sep 15, 2009 5:11 am

Steve

And the best of British to you.
Last time I did a cut and polish on an XJS it took me all Easter weekend, the T-cut takes forever :cry:
But WELL worth it :D
Tony

PS I think the tubs of elbow grease are on the shelf holding striped paint, left handed screwdrivers and long weights.
XJS Bulletin Board Moderator
2013 Mercedes Benz SLK55 AMG, 420bhp. Plenty for me, thank you.

MichaelSB

Member
Posts:409
Joined:Mon Nov 17, 2008 9:10 am
Location:Hanley Swan Nr Malvern

Elbow Grease

Postby MichaelSB » Tue Sep 15, 2009 8:16 am

Hi Steve

I believe modern elbow grease comes with 2 legs and 2 arms a spottie face and calls the owner dad, recent research has show they make a cra_ job of your car and make you pay up all the same. :lol: :lol: :lol:
Michael


Current
Jaguar XK8 4.2S Convertible
2013 Range Rover Sport Autobiography
Polaris Ranger
T6.1 VW Campervan

steveww
Posts:157
Joined:Fri Jul 31, 2009 5:23 pm
Location:Northamptonshire
Contact:

Elbow Grease

Postby steveww » Tue Sep 15, 2009 9:46 am

I have access to the 2 armed and 2 leddeg variety of elbow grease: my next door neighbours lad does a good job on our everyday cars but I do not trust him with my XJS.

Mine is a convertible so at least I do not have to do the roof as such. I will be using Renovo on it to give it a good clean and proofing.

I have an electric polisher but I am too scared to use it with T-Cut in case I burn through the paint.

I only have one side left to do and it is looking much better now. There are still a couple of deeper scratches that have not come out.

User avatar
MARKPEARSON

Member
Posts:157
Joined:Sat May 27, 2006 11:25 pm

Elbow Grease

Postby MARKPEARSON » Tue Sep 15, 2009 9:00 pm

Hi Steve

Just a thought Bilt Hamber advertise paint care products the flexible clay bar may bar an alternitive to T Cut www.bilthamber.com/ I am concidering this but will try it on wifes car first if you try can you let us know how it goes

Best Regards Mark

steveww
Posts:157
Joined:Fri Jul 31, 2009 5:23 pm
Location:Northamptonshire
Contact:

Elbow Grease

Postby steveww » Wed Sep 16, 2009 11:30 am

I have a clay bar and this is very good at lifting off small imperfections. T-Cut and similar are good for generally removing oxidisation and small scratches.


Who is online

Users browsing this forum: No registered users and 3 guests