Will convertible outer sill fit cabriolet?
Moderators:davidr, BigCatXJS, dhdove
-
ChrisDixon
- Posts:330
- Joined:Wed Oct 10, 2007 1:51 pm
- Location:Kent
I note there are different part numbers but as in the flesh the sills look similar, will a (pre-facelift) convertible sill fit a cabriolet?
-
Brakebuster
- Posts:3145
- Joined:Tue Apr 18, 2006 1:17 pm
- Location:Gloucester UK
Re: Will convertible outer sill fit cabriolet?
yes, to a point....
the difference comes with the inner sections behind the front wheel , as there is a different filler panel , as on the convertible, there is a longitudinal tube to strengthen the sill, the outer panel has a flitch plate to surround this
however
the actual outer sill skin is identical between all three models ( coupe , convertible and cabriolet ) , and exactly the same length
if you are after some, i have a pair of cab ones brand new in the box from Jaguar that i never used ,
BB
the difference comes with the inner sections behind the front wheel , as there is a different filler panel , as on the convertible, there is a longitudinal tube to strengthen the sill, the outer panel has a flitch plate to surround this
however
the actual outer sill skin is identical between all three models ( coupe , convertible and cabriolet ) , and exactly the same length
if you are after some, i have a pair of cab ones brand new in the box from Jaguar that i never used ,
BB
1989 5.3ltr V12 XJS Coupé FULLY RESTORED
2015 2.2TD Sportbrake in BRG and black leather
1994 3.2S XJ40 in Morocco Red with Doeskin interior
old cars
1999 4ltr Sovereign XJ8
2004 X-Type
2015 2.2TD Sportbrake in BRG and black leather
1994 3.2S XJ40 in Morocco Red with Doeskin interior
old cars
1999 4ltr Sovereign XJ8
2004 X-Type
-
ChrisDixon
- Posts:330
- Joined:Wed Oct 10, 2007 1:51 pm
- Location:Kent
Re: Will convertible outer sill fit cabriolet?
Are the 'cab ones diffferent from the coupe? I might consider at least acquiring what panels I have for future use, as if I wait long enough the value of the car will go up enough to justify spending money on it! Please post or PM me the price. Do you have any other 'cab specific bits? You may have seen my posts about the rear hardback glass, I can't find anything out about this at all and am on the verge of having a polycarbonate version made.
Who is online
Users browsing this forum: No registered users and 13 guests