Receiver-Dryer autopsy

Moderators:davidr, BigCatXJS, dhdove

poprivet

Member
Posts:1985
Joined:Mon Jan 16, 2006 3:20 pm
Location:Hampshire
Contact:
Receiver-Dryer autopsy

Postby poprivet » Sat Nov 04, 2006 4:04 pm

http://www.jec-xjs-forum.org.uk/xjsbb2/ ... 37_1-3.jpg
A= Spring to keep dessicant pack compressed
B= Screen with glass fibre disc
C= Dessicant beads
D= Glass fibre wadding
E= Fine mesh screen
F= Locating disc
G= Copper tube, approx 2" long centrally located
H= Sight glass

Apart from the first 2" where the dessicant pack is located, the rest of the tube contains nothing (except refrigerant!)
Pop

User avatar
dhdove

Member
Posts:1539
Joined:Wed Sep 14, 2005 1:00 am
Location:South Gloucestershire

Autopsy

Postby dhdove » Sat Nov 04, 2006 7:01 pm

Pop
Doesn't your lawn need cutting or something? 8)
DH Dove
XJS Bulletin Board Moderator
2013 Mercedes Benz SLK55 AMG, 420bhp. Plenty for me, thank you.

poprivet

Member
Posts:1985
Joined:Mon Jan 16, 2006 3:20 pm
Location:Hampshire
Contact:

Postby poprivet » Sat Nov 04, 2006 9:53 pm

:lol: The lawn will have to wait a bit, have you any idea how tricky it is to get one of these things back together again?
Pop

User avatar
ng4xjs

Member
Posts:477
Joined:Thu Jul 29, 2010 12:49 pm

Receiver-Dryer autopsy

Postby ng4xjs » Thu Apr 19, 2007 1:55 pm

Blimy Pop

I'm having my R12 replaced next week with 134a and a new dryer.

Although I've had the system tested every couple of years over the 7/8 I've had the car it has never needed any new gas. This year started badly with an everso slightly suspect water valve and which when I replaced encouraged the system to work again. However I'm now committed to the change over.

Regards
Nick

1994 4.0 XJS AJ16 BRG
2009 2.2 X Type Diesel BRG
2007 4.2 X150 Silver

poprivet

Member
Posts:1985
Joined:Mon Jan 16, 2006 3:20 pm
Location:Hampshire
Contact:

Receiver-Dryer autopsy

Postby poprivet » Thu Apr 19, 2007 8:34 pm

Sounds expensive :cry: I've learnt a lot about the A/C over the last few months. Unfortunately, to do it legally and professionally the kit needed is a large financial investment. Added to the time involved in locating faults and then obtaining and replacing the parts I can now see why the firms have to charge what they do.
Still, once its done you can look forward to some great summer motoring. An xj-s needs its A/C. Some do without, but without a fair bit of work, the blowers will stay in re-circ mode and the re-heat battery will still operate.
Keep us updated!
Pop


ptjs1

Member
Posts:3520
Joined:Thu Apr 27, 2006 7:14 pm
Location:Kent

Receiver-Dryer autopsy

Postby ptjs1 » Fri Apr 20, 2007 5:45 pm

Nick,

Not that I know a lot about these things, but based on the previous posts on this subject, why are you not going for R413a as a straight replacement for your R12?

Paul



1995 XJS 4.0 Convertible
1980 XJ-S Pre-HE
Jaguar 4.2 Supercharged engine (but not with a Jaguar body..)

User avatar
dhdove

Member
Posts:1539
Joined:Wed Sep 14, 2005 1:00 am
Location:South Gloucestershire

Receiver-Dryer autopsy

Postby dhdove » Sat Apr 21, 2007 2:14 pm

Pop
"without a fair bit of work, the blowers will stay in re-circ mode and the re-heat battery will still operate."
Can you explain please?
DH Dove

XJS Bulletin Board Moderator
2013 Mercedes Benz SLK55 AMG, 420bhp. Plenty for me, thank you.

poprivet

Member
Posts:1985
Joined:Mon Jan 16, 2006 3:20 pm
Location:Hampshire
Contact:

Receiver-Dryer autopsy

Postby poprivet » Sat Apr 21, 2007 6:08 pm

As I understand it, even when working normally, the air will be cooled below the dew point (condensation formed) to provide de-humidification and then re-heated to the required temperature.
If there isn't chilling available and the system is trying to cool, the Delanair III will go to full cooling mode which provides re-circ, not fresh air.
The heater water valve is normally open, vacuum closes it, so its impossible to manually shut it off, I doubt many shut completely even when the're supposed to.
If someone wanted to abandon the fridge side, it would be better to install a manual valve in the water pipework and somehow manually control the vacuum to the blower flaps. This is covered by the Gardner and Napoli mods on the MkII and no doubt with modification on the MkIII although I've not studied it lately as I have cooling :wink:
Pop


User avatar
Jon
Posts:108
Joined:Sun Sep 18, 2005 6:07 pm
Location:Under the Jag.

Receiver-Dryer autopsy

Postby Jon » Sun Apr 22, 2007 1:45 am

On my XJS I installed a switch which permitted me to have fresh air but without the air con running. As pop says, if the cooling requirement became too great, the delanair would go into recirc mode, thus defeating the object. So I added another switch which disables the recirc solenoid 8)

CLEAN old '87 XJ-S 3.6 manual (for sale!)
If no-one buys it soon, its going on classic insurance!
'96 XJR manual (the green monster)


Who is online

Users browsing this forum: No registered users and 1 guest