Fitting a trip computer

Moderators:davidr, BigCatXJS, dhdove

User avatar
Gordon@1962
Posts:186
Joined:Mon Mar 06, 2006 6:41 pm
Location:Hull
Fitting a trip computer

Postby Gordon@1962 » Thu Mar 30, 2006 6:00 pm

I've a 1991 model with the old analogue clock in and was wondering if there would be any problems fitting a trip computer?

http://www.razey.karoo.net/images/TripComputer.jpg

Does anyone know if it is all wired up and I just need the parts, or if it is more complicated than that? :idea:

thx, :wink:
XJ-S Coupe 1991
[url=http://www.jec-xjs-forum.org.uk/xjsbb2/gallery/xjs-show-galentry.php?galentry=280_3][color=blue][b][u]My Gallery Photos[/b][/u][/color][/url]

poprivet

Member
Posts:1985
Joined:Mon Jan 16, 2006 3:20 pm
Location:Hampshire
Contact:

Postby poprivet » Thu Mar 30, 2006 6:32 pm

Your picture shows the model for 6 cylinder engines, the V12 has 2 white plugs. It is a project I tried a couple of years ago, the analogue clock and the computer use the same connector, of course the wood faced panel is different.
I couldn't get any fuelling information on mine, perhaps the computer was faulty as I couldn't locate any other missing interface anywhere. In the end I gave up and went back to the clock.
Pop

User avatar
Gordon@1962
Posts:186
Joined:Mon Mar 06, 2006 6:41 pm
Location:Hull

Postby Gordon@1962 » Thu Mar 30, 2006 6:51 pm

Thanks Pop.
It is the 6 cyl and fuel information I'm after.

I think if I can get one cheap enough I might give it a go, but if there a bit pricey I don't think I'll risk it. :oops:
XJ-S Coupe 1991
[url=http://www.jec-xjs-forum.org.uk/xjsbb2/gallery/xjs-show-galentry.php?galentry=280_3][color=blue][b][u]My Gallery Photos[/b][/u][/color][/url]

apax
Posts:23
Joined:Tue Sep 29, 2009 1:26 pm

Postby apax » Fri Mar 31, 2006 4:03 pm

Hi Gordon@1962. It'll probably be about £20 on Ebay, but you MUST do some research on part numbers first, as there were different types in different years for different cars.
I have one going spare (part no. DAC 3749) which I bought because my computer wasn't working when I bought the car. Pulled out the existing computer and it wasn't plugged in!!!
Just as well really as, according to Pop's post, mine may be a V12 fitting as it has 2 white x 3 pin connectors. I was told it had come off an '87 3.6 but my car (3.6 cabriolet) has a single connector, as per your photo. This is why the research is vital.
Cheers, Archie.

User avatar
Gordon@1962
Posts:186
Joined:Mon Mar 06, 2006 6:41 pm
Location:Hull

Postby Gordon@1962 » Fri Mar 31, 2006 4:31 pm

I've realised the one with the single blue conector is for the 6 cyl and the one witrh two whites ones is for the 12 cyl.
There were 2 on ebay. One for £20 for the 12 cyl and one for £10 for the 6 cyl.

I'd already started biding for the 6 cyl model and was in front. :lol:
But I got out bid by about 50p becasue I was late home. :evil:
All becasue I poppped into Halfords for some wax. :cry:

Never mind. :roll:

Regards
Gordon
XJ-S Coupe 1991
[url=http://www.jec-xjs-forum.org.uk/xjsbb2/gallery/xjs-show-galentry.php?galentry=280_3][color=blue][b][u]My Gallery Photos[/b][/u][/color][/url]

User avatar
Jon
Posts:108
Joined:Sun Sep 18, 2005 6:07 pm
Location:Under the Jag.

Postby Jon » Fri Mar 31, 2006 5:48 pm

The one you want is with the blue connector, and yes it will plug straight in (did it on mine) if you can get hold of the veneer panels that is a bonus, alternately you could hack your single piece veneer down to size like we did :twisted:
CLEAN old '87 XJ-S 3.6 manual (for sale!)
If no-one buys it soon, its going on classic insurance!
'96 XJR manual (the green monster)

User avatar
Gordon@1962
Posts:186
Joined:Mon Mar 06, 2006 6:41 pm
Location:Hull

Postby Gordon@1962 » Fri Mar 31, 2006 6:28 pm

Thanks Jon,

So all I need now is the one I need. :cry:
XJ-S Coupe 1991
[url=http://www.jec-xjs-forum.org.uk/xjsbb2/gallery/xjs-show-galentry.php?galentry=280_3][color=blue][b][u]My Gallery Photos[/b][/u][/color][/url]

User avatar
Jon
Posts:108
Joined:Sun Sep 18, 2005 6:07 pm
Location:Under the Jag.

Postby Jon » Sat Apr 01, 2006 3:07 pm

CLEAN old '87 XJ-S 3.6 manual (for sale!)
If no-one buys it soon, its going on classic insurance!
'96 XJR manual (the green monster)

User avatar
Gordon@1962
Posts:186
Joined:Mon Mar 06, 2006 6:41 pm
Location:Hull

Postby Gordon@1962 » Sat Apr 01, 2006 6:15 pm

Nice.

I've asked the seller a few questions and if ok, I'm going to bid. :lol:

thx m8, :wink:
XJ-S Coupe 1991
[url=http://www.jec-xjs-forum.org.uk/xjsbb2/gallery/xjs-show-galentry.php?galentry=280_3][color=blue][b][u]My Gallery Photos[/b][/u][/color][/url]

apax
Posts:23
Joined:Tue Sep 29, 2009 1:26 pm

Postby apax » Sat Apr 01, 2006 11:28 pm

The answer to one of the questions is that it is from a V12!
You really do need to know the part number that applies to your car or you'll be shooting in the dark.
Cheers, Archie.

User avatar
Gordon@1962
Posts:186
Joined:Mon Mar 06, 2006 6:41 pm
Location:Hull

Postby Gordon@1962 » Sun Apr 02, 2006 10:30 am

ah ha!
So you read my question on ebay. :lol:

I think one of the problems of buying second hand parts is that the sellers don't always know the part number. :?:
I have what I thought was the right parts catologue for my car but part no. DAC 3749 in my book shows 2 white plugs comming out of the back, but if I want one to fit my car it will need 1 blue plug. :?

Do you think if I make sure it comes from a 3.6 coupe near to 1991 (Janaury) as possiobe and it has 1 single blue plug it will be ok?
Or do you think I need to get the right part number and buy one from a dealer who has the part number also? :idea:
If so either I need a new parts catologue or my car is a hybrid. :shock:

Regards
Gordon
XJ-S Coupe 1991
[url=http://www.jec-xjs-forum.org.uk/xjsbb2/gallery/xjs-show-galentry.php?galentry=280_3][color=blue][b][u]My Gallery Photos[/b][/u][/color][/url]

poprivet

Member
Posts:1985
Joined:Mon Jan 16, 2006 3:20 pm
Location:Hampshire
Contact:

Postby poprivet » Sun Apr 02, 2006 12:04 pm

There should be a metallic Jaguar sticker on the back of the computer with both the part number and a date code, for instance the one I have (for a 3.6) is DAC4452 and 2188 (indicating 1988) I would be very suspicious of any seller not being able to provide that sort of basic information.
There would be a difference between USA and UK computers due to the difference in size of gallons.
Pop

User avatar
Gordon@1962
Posts:186
Joined:Mon Mar 06, 2006 6:41 pm
Location:Hull

Postby Gordon@1962 » Sun Apr 02, 2006 12:42 pm

Any ideas on how I would find out the part number I'd need for my model? :idea:
Its a 3.6 coupe registered 02/01/91.
VIN/Chassis number SAJJNAEC3CA175963
XJ-S Coupe 1991
[url=http://www.jec-xjs-forum.org.uk/xjsbb2/gallery/xjs-show-galentry.php?galentry=280_3][color=blue][b][u]My Gallery Photos[/b][/u][/color][/url]

User avatar
Jon
Posts:108
Joined:Sun Sep 18, 2005 6:07 pm
Location:Under the Jag.

Postby Jon » Sun Apr 02, 2006 8:06 pm

There'll be no difference between pop's 1988 car and your 1991 variant as far as the trip comp. is concerned, so you're after a DAC4452.

I had previously thought that only the 3.6 cars had the blue connectors, as they facilitate the fault code readout not present on the V12 cars (these also have another box known as a fuel interface unit) but it seems I'm wrong! :roll:
CLEAN old '87 XJ-S 3.6 manual (for sale!)
If no-one buys it soon, its going on classic insurance!
'96 XJR manual (the green monster)

User avatar
Gordon@1962
Posts:186
Joined:Mon Mar 06, 2006 6:41 pm
Location:Hull

Postby Gordon@1962 » Sun Apr 02, 2006 8:12 pm

Thanks Don, :wink:
XJ-S Coupe 1991
[url=http://www.jec-xjs-forum.org.uk/xjsbb2/gallery/xjs-show-galentry.php?galentry=280_3][color=blue][b][u]My Gallery Photos[/b][/u][/color][/url]


Who is online

Users browsing this forum: No registered users and 2 guests