www.jec.org.uk

Good afternoon all,

could somebody please tell me the easiest way to get to the back torx bolts on my facelift seat rail. I need to get the seat out and don't want to do any damage!

Cheers

Jez

Jez,

I used a torx bit on a wobble bar and ratchet drive. With seat all the way forward, there is just enough access

ATB
Nigel

The seat had a pound coin stuck in the runner and I couldn't move it forward to get to the bolts. Seats are out and refurbished and back in again!

Thanks for the reply though.

Jez