Postby Jagracer47 » Sun Apr 02, 2017 5:49 pm
Hope you have now fixed your car. Gendan software will work on OBD2 port, just click the unrecognised box on the front page, then reboot it. Your problem, how to fix it. Clean the swirl pot filter and tank, replace the pipes. Fit a new carbon filter in the top of the fuel tank under the filler cap. There are two little fuses in the leads under the battery, if they are corroded, as might be the battery earth in the floor, the fuel pump stops, been there. Next, there is a big bunch of connectors under the scuttle which join up the engine loom,carefully spray WD40 in it and wiggle about to get the thing apart. You will pobably have to remake the whole thing again. Its a good place to look for any AJ16 engined car. The cruise control system is another pig, if the clutch malfunctions, it blows out the Traction Control Module. Take the fuses out, you do not need cruise control with all the silly speed limits about. If in doubt, give it a good kicking, it always works on Telly. Have fun. I always carry a few spare bits, fence wire, pliers, gaffer tape, nut and bolt to fix a puncture. I have even seen punctures fixed by stuffing the tyre with straw. Hope you get sorted.