Page 1 of 1
Aluminium Spinner Removal Tool
Posted: Sun Nov 25, 2018 8:18 pm
by Trekie
Hi Guys,
Can you help, does any one know where I could purchase an Aluminium Spinner Removal Tool.
I have looked at the Oldtimers removal tool but thought it was rather expensive.
Thanks
Trekie
Re: Aluminium Spinner Removal Tool
Posted: Tue Nov 27, 2018 3:25 am
by Speediejag
Like you, I didn't want to be swinging a hammer close to my fenders. I was referred to Lionel based in the UK who only makes 2 tools per week to supplement his pension. It cost about 70 pounds. His email is
cjservices1931@aol.com. Send him an email and he will put you in the production que, provide instructions and sizes. He makes the aluminum removal tool in 3 diameter options based on the diameter of your spinners. Be sure to measure all four spinners. I received the tool in about a month and it's great. I use a bar/torque wrench, an extension bar and a socket to safely remove or tighten my spinners.
Happy motoring, SpeedieJag
Re: Aluminium Spinner Removal Tool
Posted: Wed Nov 28, 2018 11:48 pm
by Trekie
Thanks for the information, I shall contact Lionel.
Re: Aluminium Spinner Removal Tool
Posted: Thu Nov 29, 2018 8:29 am
by iRS
I'm intrigued by this. Ii would be interesting to see a photo. Would that be possible?
Re: Aluminium Spinner Removal Tool
Posted: Fri Nov 30, 2018 5:50 am
by Speediejag
Sure. Here are two pictures. I initially saw the product and got Lionel's information from a davejaguar66 video on YouTube. Very good channel. Good luck, James in California.
Re: Aluminium Spinner Removal Tool
Posted: Thu Dec 06, 2018 1:54 pm
by iRS
Many thanks. I think I'll get in the queue.