Installing car audio

Moderators:Aceman, ecosselynx

vegas602

Member
Posts:53
Joined:Sun Jan 29, 2012 5:42 pm
Installing car audio

Postby vegas602 » Fri Mar 04, 2016 7:44 pm

Hi, I'm looking to install a new radio/speakers into my 1968 340 auto. The original radio and centre speaker were broken and removed and the car was retrimmed prior to me buying it, so is bit of a blank canvas. I will probably put a fairly standard modern radio/mp3 player in the original radio spot, but haven't really found a suitable spot for a pair of small speakers. I had assumed they would go in the side trim panels in the front footwells, but there is a blanking plate there so very little room. Has anyone found an ideal spot?

Martec

Member
Posts:981
Joined:Tue Apr 07, 2009 7:08 pm
Location:North Lincs

Re: Installing car audio

Postby Martec » Sat Mar 05, 2016 10:55 am

Hi,

I found the two blanking plates in the footwell ideal for the job, I took them out, cut a large hole in to tightly fit a round margerine tub and sealed it in so it was water tight.

Then cut a hole in the trimmed panel to take the speaker. With one in each footwell and one either side of the rear parcel shelf that works well with a modern radio/CD player in the lower dash.

Brian
MY2000 3ltr S type manual standard car with leather seats, cruise control and mistral blue metallic paint.

1961 3.8 MkII manual, Indigo blue, nolonger runs on LPG, everything else uprated


Who is online

Users browsing this forum: No registered users and 1 guest