www.jec.org.uk

Hi

Does anyone have a NSR door for 1973 SWB XJ Series 1 for sale

Mine was wrotten at the bottom after I'd stripped the paint off

Can collect no problem

Regards
Richard

Hi Richard,
I have a choice of 3 each of them rust free and clean. Complete with all fittings, and interior panels. 2 in tan, 1 in ISIS blue.
Collection is fine with me, free to you if you collect, your choice of door.
By the way, they are here in Canada!
Phil

It's a little too far but thanks anyway Phil!!

Hi Richard,

We have one here - we are a BIT closer than Canada
We are based in Eastbourne - how far from you are we??

Cheers,
Keith

Keith

I'm in Wakefield West Yorkshire, I also possibly need a NS front wing nose repair section (just waiting to see how much bodyshop want to repair the wing) which I think you said you had. If you could let me have a collected price I could arrange to pick up

Also I need to pick your brains, on an XJ Series 1 the oil filter metal canister; is it the same on any engine size ie will a 2.8/4.2 fit a 5.3 & vice versa

Thank you
Richard

Hi Richard,

I would have to check, but I am certain V12 and XK spin on filters are different.
The door will be £30 if you want it - £50 for the front wing repair section.

Cheers,
Keith

The spin on filters for V12 and 6 cylinders are the same on cars that were fitted with them originally. EBC9658 is the current Jaguar part no, which fits AJ6 engines, as well.

But the the Series I and early SII 6 cylinder cars didn't have them, they used the disposable element (JLM9546) until engine no 8L28179. The 12 cylinder engines switched at engine no 7P30229.

So in summary I have a XJ12 S1, would I be able to take an oil filter cannister & paper filter from a S1 XJ6 (2.8 or 4.2) and fit it straight onto my car?

I need to know the above as there is one on ebay with no part numbers on it but it is a XJ S1 however the engine size it fits is not known

Sorry for confusion but I am only interested in XJ S1 2.8/4.2/5.3 interchangability (if thats a word!)

Regards
Richard

I have a XJ12 S1, would I be able to take an oil filter cannister & paper filter from a S1 XJ6 (2.8 or 4.2) and fit it straight onto my car?

No. They are different. See illustrations in the links below. And, given that you can have the correct one for less than £9, why bother buying an unidentified one from Fleabay?

http://www.sngbarratt.com/catalogue/par ... k=y&next=y

http://www.sngbarratt.com/catalogue/par ... k=y&next=yb

Keith

I'm very happy with those prices just a few questions

Is door nos or is there paint that needs to come off/does it need metalwork/has it come off a car
Is wing repair section ready to go straight on car

Other than that I appreciate your offer

Regards
Richard

Hi Richard,

The doors are all painted - but good
The nose cone is a factory repair panel in etch primer - ready to be trimmed and fitted.

All the best,
Keith

Keith

That great I'll ring you with my paymant details after the bank holiday

Regards
Richard