XJ12 Series 3 - Noisy first gear around 2000 rpm
Posted: Sat Jun 13, 2020 4:26 pm
Hello all,
I have restored the mechanics of a perfectly original 1992 Daimler Double Six V12 which has done around 100k miles.
Before the restoration there was a vibration / small shudder / rumble / whine on first gear around 2000 rpm, after the restoration also.
This noise disappear as the revs go up and or the second or third gear engages.
The restoration is a £ 20k job and the car which was in excellent shape before the restoration is even better (of course) now.
No expense has been spared.
Car had and has no rust whatsoever.
The following have been done by a master Jaguar mechanic:
1) gearbox has been drained, checked, filter replaced and oil changed;
2) gearbox mount replaced;
3) drive shaft rebalanced and universal joints replaced with new;
4) differential drained, checked and oil replaced;
5) the whole rear end, dismantled, checked, re-assembled;
6) half shafts inspected and reassembles;
7) all wheel bearings replaced.
My mechanic and I after driving the car over the last few days are at a loss as to what is causing the vibration in first gear.
Ideas which have come to mind include a damaged (accident) half shaft.
Any ideas from the more learned among us?
Thank you in advance for your help.
I have restored the mechanics of a perfectly original 1992 Daimler Double Six V12 which has done around 100k miles.
Before the restoration there was a vibration / small shudder / rumble / whine on first gear around 2000 rpm, after the restoration also.
This noise disappear as the revs go up and or the second or third gear engages.
The restoration is a £ 20k job and the car which was in excellent shape before the restoration is even better (of course) now.
No expense has been spared.
Car had and has no rust whatsoever.
The following have been done by a master Jaguar mechanic:
1) gearbox has been drained, checked, filter replaced and oil changed;
2) gearbox mount replaced;
3) drive shaft rebalanced and universal joints replaced with new;
4) differential drained, checked and oil replaced;
5) the whole rear end, dismantled, checked, re-assembled;
6) half shafts inspected and reassembles;
7) all wheel bearings replaced.
My mechanic and I after driving the car over the last few days are at a loss as to what is causing the vibration in first gear.
Ideas which have come to mind include a damaged (accident) half shaft.
Any ideas from the more learned among us?
Thank you in advance for your help.