Page 1 of 1

wheel arch liner removal

Posted: Sun Mar 31, 2019 8:54 pm
by stypemike2245
hi all. removed the right rear wheel this weekend to do some wheel cleaning. while I was at it had a go at cleaning inside the wheel arch lots of soil and dust. I realised it might be an idea to remove the wheel arch liner spotted the fasteners and removed them and that was as far as I could go. I got the front area around the arch out and peered behind with a torch I couldn't quite see what was stopping it from coming out. there did seem to be some sort of noise padding and I didn't want pull to much in case I damaged it. So any ideas how to remove the liner. thanks all

Re: wheel arch liner removal

Posted: Sun Mar 31, 2019 9:45 pm
by J44EAG
Whilst I`ve not done that job on mine, I know that some of the trim can be the very Devil to remove without some form of decent techi manual. Sadly, the manuals we have are written for Jaguar qualified and trained personnel rather than the DIY types like us. So in that respect we are rather left in the dark as Jaguar always considered that cars of this nature would be serviced at Main or Independent garages.

The upshot is unless we document and expand on certain procedures as we do such jobs, then removal and replacement of many items remains an industry secret.

Hopefully there will be one of our members along shortly that might be able to explain what is required to get the last part of your liner separated from the car. All I can say is look carefully for well hidden clips or fastenings. It may be that your local Main Dealer Parts man might be able to show you an exploded diagram of wheel arch liner parts and clips.

Please let us know how you get on.

Mike K