Page 1 of 1
X350 BALL JOINT REPLACE
Posted: Tue Mar 05, 2013 10:39 am
by orme
Hello all. Please can someone tell me if it is possible to buy a front lower ball joint ONLY for X350 (2007 3.0 Sov) and have it pressed into the part it goes into (arm)? A local indy has said you have to buy the whole assy (£145 approx) They ordered a ball joint (listed) and when it arrived it was too small (short) Now total bill will be approx £309 (with VAT and tracking included) A contact of mine (ex Jag/Aston Martin main dealer tech) told me he could of got a used assy and fit it for approx £150. What is the situation with these ball joints? Thanks.
Re: X350 BALL JOINT REPLACE
Posted: Tue Mar 05, 2013 11:06 am
by J44EAG
Try Neville Anderson at North east Jaguar Spares. Have the last six digits of your Vin number to hand so the correct parts can be identified.
Tell Neville you are a JEC member. I think you will be pleasantly suprised at what he may be able to do for you.
The 350 shares the S-type chassis platform so we have quite a bit of experience with suspension issues.
Complete wishbone replacement is needed in order to fix a worn ball joints on these cars. There is a ball joint on both the upper and lower wishbones on the 350 and on the later models of S-type.
Mike K
Re: X350 BALL JOINT REPLACE
Posted: Tue Mar 05, 2013 12:31 pm
by orme
Thankyou Mike!
Re: X350 BALL JOINT REPLACE
Posted: Tue Mar 05, 2013 1:41 pm
by robv12
yep agree with Mike, fit the whole assembly on these cars, most guys do not recommend pushing in a new ball joint, the alloy is thin, and the b/j has to go in dead square, we have seen them badly fitted damaging the upright and in one case starting to come out again, the consequences here do not bear thinking about
speak to Neville, 0191 586 7770, top man, he supplied all my suspension parts for my 350 at a fraction of the cost of Jaguar
Re: X350 BALL JOINT REPLACE
Posted: Mon Mar 25, 2013 10:33 am
by orme
Thankyou robv12.