Page 1 of 1
Cruise control not working
Posted: Tue Oct 23, 2018 8:43 am
by PARKIE007
The cruise control on my 2003 S-type 4.2 stopped working recently. At the time I was having problems with a front wheel sensor which has been replaced and the DSC and ABS warning lights have now gone out. There are no warning lights, or as far as I know any error codes showing for the cruise control failure. What should I be looking at as the likely cause and remedy?
Re: Cruise control not working
Posted: Tue Oct 23, 2018 11:02 am
by JimboV8
The brake pedal switch would be the next place to look.

Re: Cruise control not working
Posted: Tue Oct 23, 2018 5:25 pm
by Montana5
As you know Cruise is linked to Speed Sensors, I would leave it a few days to see if it returns itself, some faults linger until a few journeys are made.
Doug.
Re: Cruise control not working
Posted: Fri Oct 26, 2018 5:13 pm
by PARKIE007
Thank you both for your comments. The speed sensor was replaced some months ago now, so I'm guessing the problem is not linked to that. I'll have a look at the brake pedal switch or maybe ask the garage to do so. All the best.
Re: Cruise control not working
Posted: Sun Oct 28, 2018 11:45 pm
by Blueborin
I had a similar issue, which was caused by a faulty brake servo. Once replaced the problem was resolved. The brake pedal switch was also changed whilst undergoing the repair.
Robin
Re: Cruise control not working
Posted: Mon Oct 29, 2018 2:13 pm
by PARKIE007
Thanks Robin. As I live in France I'm going to have the car looked at when I come to the UK for Christmas. If the brake pedal switch replacement does not do the trick, then I'll look at the servo next.