Page 1 of 1

put new discs and pads on today

Posted: Sun May 25, 2014 6:26 pm
by Brakebuster
just a quick job


i have bought some very cheaply priced spares over the last few months from the internet , all genuine Jaguar parts ,

so today i decided to change the front discs and pads and have a general look around the suspension

the existing discs were perfectly usable, but very worn , 1mm lip in each side , and the pads were down to about 4mm thick , but i had good braking ( 114k on the clock )

so with the cheap new parts in hand it took about an hour and a half to change out both sides , cleaned up the carriers , and checked the sliders, all in good condition, copperslip on all the components that needed it and put it all back together

i wound back the piston with a ratchet clamp tool , remembering to take the lid of the brake fluid reservoir ,

i will have a go at the rears in the near future

BB

Re: put new discs and pads on today

Posted: Tue Oct 17, 2017 8:46 pm
by ng4xjs
Did you ever do the rears? Just a tad more involved than the front (Wheel sensors off for a start). Also helps to have a clockwise/anticlockwise wind-back tool.

Nick