Page 1 of 1
oil change this morning
Posted: Sat Sep 28, 2013 9:53 am
by Brakebuster
for the grand sum of £45 , i had a new filter and oil change at National Tyres , ( 2.1 V6 petrol )
this include a 10% discount by printing off a voucher
better than getting dirty myself , lol
they also did a vehicle check and pumped up the tyres for me, and let me look round while she was up in the air
all in half an hour
BB

Re: oil change this morning
Posted: Tue Jul 02, 2019 8:35 pm
by ng4xjs
I'm new to diesels but actually liking my experience thus far. Some advice please.
I've been getting a message that says "service required within 1400 miles. I bought the car in April (2.2) and it has had an annual services from new. All but the last one from a Jag main Dealer. I'm guessing this relates to the need for am oil and filter change but will this resolve the issue. Also. Anyone know how to re-set the warning message. All advice warmly received.
Nick
Re: oil change this morning
Posted: Fri Jul 05, 2019 9:04 pm
by ng4xjs
Changed the oil and filter and did a re-set. No message and all seems fine.
Nick
Re: oil change this morning
Posted: Sun Jul 07, 2019 8:31 pm
by steve_m
Nice to see you back BB.
Re: oil change this morning
Posted: Sun Jul 07, 2019 9:49 pm
by J44EAG
An old thread resurrected from 2013, Steve.
Mike
Re: oil change this morning
Posted: Mon Jul 08, 2019 9:00 am
by steve_m
Oh well.
Re: oil change this morning
Posted: Sat Oct 05, 2019 6:53 pm
by ng4xjs
2.2 Diesel. Does anyone know the correct size of the socket required to undo the plastic oil filter? My socket sizes only reach 32mm and it is just a little bigger. I'm probably looking in all the wrong places.
Many thanks
Nick
Re: oil change this morning
Posted: Mon Oct 07, 2019 6:47 pm
by ptjs1
Nick,
I'm assuming it's been over-tightened when fitting and you can't turn it by hand?
It's a 36mm head on the housing or else just use a 3-legged filter removal tool.
Good luck
Paul
Re: oil change this morning
Posted: Mon Oct 07, 2019 8:34 pm
by ng4xjs
Thanks Paul - Three legged tool did the job but it was tight.
Nick