XJ6 X300 3.2 Exhaust downpipe Lambda sensor connector locations.

[xjscharlie]

Hello Folks,
In the process of removing the downpipe from the manifolds on my XJ6 X300 3.2 and unsure of where the connector blocks are for the 2 Lambda sensors. I have seen 2 connector blocks located directly behind the cylinder head but unsure if these are the correct ones as the wiring looks different. Would appreciate any guidance. Thanx in anticipation..Charlie.

[Popsjag]

Hi Charlie.
Those 2 connectors between the bulkhead and the rear of the cylinder block are the ones for the lambda sensors.
Tricky to get to but do-able.
I trimmed back the protective wiring covering and moved mine a little to the right (sitting in the car) to make it easier - if there was to be a 'next time'.

[xjscharlie]

Many thanx~its good to know that one is not barking up the wrong tree..Rgds.