Crank sensor and throttle body gasket

Moderators:robv12, xj40_register, Popsjag

Ron1

Member
Posts:21
Joined:Mon Feb 05, 2007 8:56 pm
Crank sensor and throttle body gasket

Postby Ron1 » Wed Jun 22, 2016 9:34 am

Good Morning All,
Is the sun shining where you are?
I have had a recent problem with intermittent cutting out at low revs - usually whilst stationary.
Having compiled a list of the usual suspects, interestingly this weekend I disconnected the crank sensor to check for corrosion in the connections and found them clean. Having reassembled, on the next journey it cut out six times!
Therefore I am looking for a crank sensor which in itself appears to be a minefield. Having ascertained that the top price (ie Jaguar price) is £107 approx., alternative prices, new, vary from £30 (SNG Barratt) upwards. Has anyone any experience / problems purchasing one of these - ie does the £30 option perform as well as a £107 item? One eBay item (about £60) is described as a 'genuine Lucas sensor', did Lucas manufacture this for Jaguar?
In addition I am looking at cleaning out the throttle body but can't seem to locate a gasket - can anyone point me in the right direction please?
As always, all contributions gratefully accepted.
Many thanks
Ron
1994 X300 4.0 Sovereign - 197000 miles

User avatar
Tintin

Member
Posts:561
Joined:Mon Mar 28, 2016 10:51 am

Re: Crank sensor and throttle body gasket

Postby Tintin » Wed Jun 22, 2016 12:20 pm

When I removed the throttle body on my 4 litre AJ 16 I found that no gasket was fitted - simply a clean alloy to alloy joint. Didn't like the idea of no seal at all so on re-assembly I used a thin smear of silicone gasket. If a gasket is fitted to yours and you want to renew it you could always make one with gasket paper (see You tube tutorial).

Can't help with the sensor problem though I'm afraid.

Good luck.

Robbie
1996 4 litre XJS Celebration 2+2
Daimler Sovereign S1 4.2 1971

Ron1

Member
Posts:21
Joined:Mon Feb 05, 2007 8:56 pm

Re: Crank sensor and throttle body gasket

Postby Ron1 » Wed Jun 22, 2016 1:14 pm

Thanks Robbie

That's probably why I can't find one for sale!
I was just assuming by what I had read and previous experience of other cars and the fact that there is one available for the XJ8 that there would be one.
However I shall proceed on the basis that there isn't one.

Thanks again
Ron

User avatar
Tintin

Member
Posts:561
Joined:Mon Mar 28, 2016 10:51 am

Re: Crank sensor and throttle body gasket

Postby Tintin » Wed Jun 22, 2016 1:24 pm

Let me know if you find one is fitted to yours - it will mean someone failed to refit mine after an earlier dismantling!

R
1996 4 litre XJS Celebration 2+2
Daimler Sovereign S1 4.2 1971

PeterDavisX300
Posts:287
Joined:Wed Aug 19, 2015 10:17 am

Re: Crank sensor and throttle body gasket

Postby PeterDavisX300 » Thu Jun 23, 2016 7:25 am

I have bought second-hand sensors in the past, and they can be as fickle as the faulty one you're taking out. I purchased a new Lucas one about a year ago (10,000 miles) and it's still good so-far. I bought another spare just recently that sits in my 'clean' toolbox in the boot, it was listed on Ebay as an 'intermotor' make, and when it turned-up it was a Lucas as well. I paid about £50 for each.
1984 Mercedes 450SL Rag-Top

Ron1

Member
Posts:21
Joined:Mon Feb 05, 2007 8:56 pm

Re: Crank sensor and throttle body gasket

Postby Ron1 » Thu Jun 23, 2016 5:17 pm

Thanks Peter
Just the type of feedback that I was looking for.
I had my doubts about 2nd hand reliability, obviously well founded.
Much appreciated.

With regard to Robbie's last message, I think that I have managed to clean the throttle body and butterfly valve in situ, having now had a closer look, there doesn't appear to me to be a gasket for the throttle body on mine either.
One contributor to another Jaguar forum confirmed that there was no gasket fitted on the X300.

Thanks again


Who is online

Users browsing this forum: No registered users and 6 guests