no rear lights

Moderators:Aceman, ecosselynx

clevecot
Posts:13
Joined:Tue Mar 26, 2013 7:08 pm
no rear lights

Postby clevecot » Thu Apr 18, 2013 8:47 pm

just come home with the police behind me saying i have no rear lights ,front ones are working well also no panel lights any body help 65 s-type only had it for a few months
Andy

User avatar
sweller

Member
Posts:166
Joined:Wed Jul 22, 2009 4:02 pm

Re: no rear lights

Postby sweller » Thu Apr 18, 2013 9:31 pm

Looking at my wiring diagram it's fuse No 6 which feeds rear lights, glove box light and panel lights; front side lights too.

The fuse box is behind the centre gauge panel - there are two thumb screws in the top corners and the whole centre piece swings down, you need to remove the picnic table first.
Simon
Brighton
Sussex

clevecot
Posts:13
Joined:Tue Mar 26, 2013 7:08 pm

Re: no rear lights

Postby clevecot » Sat Apr 20, 2013 2:52 pm

have tried the fuse all ok there seems to be no power to the fuse not sure were to look now any body help
andy

oldtimer
Posts:1311
Joined:Thu Jan 19, 2012 3:19 pm

Re: no rear lights

Postby oldtimer » Sat Apr 20, 2013 8:46 pm

The Supply to NO 6 FUSE

Originates from control box (voltage regulator) assuming vehicle still has a generator and not converted to Alternator. End contact marked B, with cable colour code brown with white trace. There are six contacts on the box -- the opposite end to above is contact E for earth with black earth wire.

From the control box, brown with white trace cable goes to Ammeter from there to rotary light switch, still brown with white trace into the light switch. (There is a light switch option being three or four positions )

You should see a Red with Black trace cable coming out of the rotary light switch which goes directly to fuse six.

To test. With a bulb with two leads attached or multi meter ,clip one to earth and touch contact B on control box under bonnet ( bulb illuminates or meter shows 12v or there about). Easier to use continuity sounder. Can't remember you may need to switch ignition on.

Inside car with dash down check for continuity . I would check the light switch as a most likely fault .a short length of wire to touch the in and out terminals as described above may well provide a supply to fuse 6. and identify the fault An outside observer of the offending lights may be helpful

Hope that helps a little -let us know the result

Oldtimer

User avatar
piman
Posts:1183
Joined:Mon Oct 29, 2007 7:32 pm
Location:Oswestry

Re: no rear lights

Postby piman » Sun Apr 21, 2013 10:05 am

Hello Oldtimer,

forgive the side track, "The Supply to NO 6 FUSE ", from that it seems the 'S' type is wired differently to the MK 2 which has two fuses under the bonnet by the regulator? Are all the fuses behind the instrument panel?

Alec
Mk 2 3.8 (long term restoration), MK1 Triumph 2.5 P.I. , 564 Hymer Motorhome

oldtimer
Posts:1311
Joined:Thu Jan 19, 2012 3:19 pm

Re: no rear lights

Postby oldtimer » Mon Apr 22, 2013 5:59 pm

Hi Alec,
Certainly not a side track - 'tis how we learn.

It just so happens that I have a wiring diagram for an S type (60s style) and read directly off that so really cannot comment about the Mk 2 arrangement.

I had my S type in the sixties so forgive me for not remembering the detail. I do remember the main fuses were behind the drop down instrument panel, there may have been other in line fuses else ware but cannot remember.

I do remember fitting a 4.2 3xcarb engine though, but that's another story

Oldtimer

PS Lets hope Andy lets us know how he got on, it was he, who started this thread!

User avatar
sweller

Member
Posts:166
Joined:Wed Jul 22, 2009 4:02 pm

Re: no rear lights

Postby sweller » Tue Apr 23, 2013 7:22 am

This S-type wiring diagram is nice and clear - I found it "on the internet" ages ago; hopefully it'll be helpful for someone:

http://www.sweller.co.uk/docs/stypewire.pdf

It also prints out quite nicely.
Simon
Brighton
Sussex

clevecot
Posts:13
Joined:Tue Mar 26, 2013 7:08 pm

Re: no rear lights

Postby clevecot » Mon May 27, 2013 9:38 pm

thanks for the advice cleaned up all the temminals now all working only thing not are the panel lights they come on with the panel light switch but go of when the lights are turned on must have it wired up wrong
Andy


Who is online

Users browsing this forum: No registered users and 1 guest