Hi Paul
That's what I thought not too much of a job to make the hinge the problem is the location of the torsion bar arm holes. looks like I may be making a few till I get it right.
Search found 21 matches
- Sat Mar 09, 2019 10:18 pm
- Forum:MK2
- Topic: 1962 MK2 scuttle vent hinges.
- Replies: 3
- Views: 2990
- Fri Mar 08, 2019 9:53 am
- Forum:MK2
- Topic: 1962 MK2 scuttle vent hinges.
- Replies: 3
- Views: 2990
1962 MK2 scuttle vent hinges.
My painter has lost my scuttle vent hinges, they connect the front scuttle vent to the inner vent plate. They are the ones that have the holes in for the torsion bar arms. does anyone have any or can tell me where I can get them. Please note this is not the vacuum type.
- Thu Nov 17, 2016 3:51 pm
- Forum:E-Type ▸Cooling System
- Topic: V12 overheating and engine cutting out.
- Replies: 5
- Views: 5050
Re: V12 overheating and engine cutting out.
Update on the overheating problem. The new thermostats were checked using she who must be obeyed jam thermostat although not highly technical it showed opening at just over 80c closing fully when cooled. The old thermostats were removed, one housing came off easy and the other had a seized bolt the ...
- Tue Nov 01, 2016 10:16 am
- Forum:E-Type ▸Cooling System
- Topic: V12 overheating and engine cutting out.
- Replies: 5
- Views: 5050
Re: V12 overheating and engine cutting out.
Hi thanks for that, the owner is getting two new thermostats as it is not certain when they were fitted I will check them before fitting. The water pump is new, I seem to remember reading that one lost its impeller but it may have been a bad dream.. The coolant is blue and has not been mixed that I ...
- Fri Oct 28, 2016 9:40 am
- Forum:E-Type ▸Cooling System
- Topic: V12 overheating and engine cutting out.
- Replies: 5
- Views: 5050
V12 overheating and engine cutting out.
Hi. I have a friend here in Spain with a series 3 E type V12. He drove the car to Spain from the UK last year and had no problems with overheating. In July we went for a short spin of around 25Km the engine overheated and cut out. Once allowed to cool a bit it restarted and was driven into my garage...
- Tue Jul 05, 2016 4:15 pm
- Forum:MK2 ▸Cooling System
- Topic: Evans Waterless Cooolant, have you used it?
- Replies: 15
- Views: 8430
Re: Evans Waterless Cooolant, have you used it?
Hi one and all, does anyone have an update to this thread? I am thinking of including the waterless coolant in my rebuild.
- Sun Feb 14, 2016 5:09 pm
- Forum:MK2 ▸Interiors
- Topic: Interior trim installation guide
- Replies: 12
- Views: 7982
Re: Interior trim installation guide
Hi Brian The seats are being upholstered by Brian Cates in Bournemouth, his work is exceptional. I am fitting new door cards as mine were rotten on the bottom once removed. The doors however were not rusted so luckily no repairs required. Brian is supplying additional materials to finish the trimmin...
- Sat Feb 13, 2016 5:36 pm
- Forum:MK2 ▸Interiors
- Topic: Interior trim installation guide
- Replies: 12
- Views: 7982
Re: Interior trim installation guide
Hi Brian Yes I see where you are coming from, The head lining is an no brain'r the cost is not too bad. the harness I have is in good order apart from the tape binding it together, I have looked on the tinternet to find the correct tape but as yet no joy. I am an electrician to trade so fixing / man...
- Fri Feb 12, 2016 11:24 pm
- Forum:MK2 ▸Interiors
- Topic: Interior trim installation guide
- Replies: 12
- Views: 7982
Re: Interior trim installation guide
Thanks for the replies, I will take some anesthetic and ask Auto Sparks for a price. I had a feeling that I would have to wing it or get a professional to do the trim, I have taken enough photos and provided I don't have a bad case of amnesia I should be able to do the trim OK having done a few less...
- Thu Feb 11, 2016 2:30 pm
- Forum:MK2 ▸Interiors
- Topic: Interior trim installation guide
- Replies: 12
- Views: 7982
Interior trim installation guide
Hi Everybody, I am sending my bodywork off to the painter next week so thoughts are turning to the re-trim. I have photographed everything as I removed it but would like to know if there are any re-trim guides out there. My seats are being re-trimmed in the UK and I will pick them up in April, I wou...
- Tue Oct 06, 2015 7:29 pm
- Forum:MK2 ▸Suspension
- Topic: Replacing bottom ball joints with sealed for life items.
- Replies: 2
- Views: 3067
Re: Replacing bottom ball joints with sealed for lift items.
Thanks Brian, a lot less hassle with sealed for life.
Started on the front brakes this afternoon so far so good just new seals and pads required.
Regards Frank
Started on the front brakes this afternoon so far so good just new seals and pads required.
Regards Frank
- Tue Oct 06, 2015 3:03 pm
- Forum:MK2 ▸Suspension
- Topic: Replacing bottom ball joints with sealed for life items.
- Replies: 2
- Views: 3067
Replacing bottom ball joints with sealed for life items.
Hi, I am busy rebuilding the front subframe and suspension on my 1963 MK2 Jaguar. The bottom ball joints are completely shot both ball and cups are badly corroded, is it possible to fit later sealed for life ball joints?
Regards Frank
Regards Frank
- Sat Oct 03, 2015 6:23 pm
- Forum:MK2 ▸Engine
- Topic: MK2 3.8 Seized piston removal
- Replies: 10
- Views: 5294
Re: MK2 3.8 Seized piston removal
Hi Brian Did you have to alter the tin sump to accommodate the seal conversion. I have a tin sump. Yes £400 I thought it was bit over the top, anyway there is nothing wrong with standard filters as long as you change them regularly. My engine came with a mesh filter that looks like it had not been c...
- Sat Oct 03, 2015 12:53 pm
- Forum:MK2 ▸Engine
- Topic: MK2 3.8 Seized piston removal
- Replies: 10
- Views: 5294
Re: MK2 3.8 Seized piston removal
Hi Brian Thanks for the heads up on the spin off filter conversion, at 400 pounds you would think it was better. My filter unit has the five bolts, so good news there. I have been restoring old motorcycles and cars for over 30 years (first time with a jag) and found that modern gasket materials are ...
- Fri Oct 02, 2015 5:42 pm
- Forum:MK2 ▸Engine
- Topic: MK2 3.8 Seized piston removal
- Replies: 10
- Views: 5294
Re: MK2 3.8 Seized piston removal
Hi Brian Yes you are right, I had thought that myself, money is not too much of an issue as I want it right. The problem I have is I live in Granada Spain, I am a member of the Granada veteran car club so I will ask the locals if they know of a good shop that can do the work. I would change the Oil ...