Hello, may I suggest that you take a look at my final post under the heading 'Engine starts and idles etc'. From my investigations and testing I would recommend replacing the crank position sensor. Hope this helps.

Hugh.

Hello, may I suggest that you take a look at my final post under the heading 'Engine starts and idles etc'. From my investigations and testing I would recommend replacing the crank position sensor. Hope this helps.

Hugh.

Hello, may I suggest that you take a look at my final post under the heading 'Engine starts and idles etc'. From my investigations and testing I would recommend replacing the crank position sensor. Hope this helps.

Hugh.

Well I finally, after many hours sorted the problem! The car had the MAF sensor; throttle body plus potentiometer; engine coolant temp sensor (the one with two leads on the inlet manifold); engine air temp sensor; fuel pressure regulator; engine control module; spark plugs; ignition coils; air filte...

Hello can any body help please; X300 95 reg 3.2 Sport 103K miles; engine will start and idle but goes into misfire, coughing through intake above 1500rpm. I had this problem about six months ago but it cleared itself overnight, then about six weeks ago it happened again. New plugs were fitted with n...

Please could somebody advise me if there is a method of searching through past JEC magazine articles to find specific items? As an example I seem to recal an article about the testing and cleaning of throttle body and/or air mass flow sensors but I can not manually find it in my past issues. Thank y...

I had exactly the same with my 3.2 Sport. It is common and especially so if you use fully synthetic oil. Provide your Jaguar dealer with your engine number to obtain the correct switch as they were modified internally. Very easy to get to from underneath the car, use a close fitting spanner so as no...

I had exactly the same with my 3.2 Sport. It is common and especially so if you use fully synthetic oil. Provide your Jaguar dealer with your engine number to obtain the correct switch as they were modified internally. Very easy to get to from underneath the car, use a close fitting spanner so as no...