I would like to acquire a Filter Head, part number 11671, for my late 4.2 engine. It is the type with the four chambers between the head and the block.
I have acquired a replacement, thanks.
Search found 26 matches
- Tue Oct 17, 2017 4:52 pm
- Forum:E-Type ▸Buy and Sell
- Topic: Wanted - Filter Head - Completed
- Replies: 0
- Views: 1971
- Fri May 27, 2016 9:49 am
- Forum:XF ▸Electrical
- Topic: Ghost Window Operation
- Replies: 2
- Views: 2095
Ghost Window Operation
The car is a 2010 3 litre petrol Premium.
On two occasions having parked and locked the car, on returning all the windows have been in the down position but the car is still locked.
Anybody else experienced this problem, what could be the cause.
Roger McEwen

On two occasions having parked and locked the car, on returning all the windows have been in the down position but the car is still locked.
Anybody else experienced this problem, what could be the cause.
Roger McEwen
- Wed Aug 26, 2015 3:28 pm
- Forum:XF ▸New Arrivals
- Topic: A necessary upgrade
- Replies: 1
- Views: 2744
A necessary upgrade
Just swapped my 2006 98k miles X Type for a 2010 XF 3.0 Luxury Petrol. The X Type was having turbo problems that were getting worse so it had to go. No more diesels for me; don't do enough miles / long runs any more. The only criticism of the XF is that it hasn't got DAB radio, does anyone have any ...
- Sun Jun 28, 2015 12:05 pm
- Forum:E-Type ▸Brakes
- Topic: Haandbrake adjustment
- Replies: 9
- Views: 8701
Re: Haandbrake adjustment
Hi I have fitted the SNGB handbrake compensator along with the JEC Cable. The beauty of the compensator is that both sides of the handbrake operate at the same time and with the same effectiveness, unlike the original system where one side operates and then the other (unless you have modded the fitt...
- Sun Oct 12, 2014 6:20 pm
- Forum:E-Type ▸Buy and Sell
- Topic: Windscreen Wiper Link Ball Joint
- Replies: 9
- Views: 5231
Re: Windscreen Wiper Link Ball Joint
Hi All,
I bought the "female" part of the ball joint unit complete with spring clip today at the Jaguar Spares Day from RM&J Smith for £17.50.
They had a box full of them!!
Phone 01270 780954
Regards,
Roger

I bought the "female" part of the ball joint unit complete with spring clip today at the Jaguar Spares Day from RM&J Smith for £17.50.
They had a box full of them!!
Phone 01270 780954
Regards,
Roger
Re: Bad buy
I feel very sorry for you. I bought me X Type Sport 2.0D new in December 2006. It has been serviced as per the schedule at Jaguar dealers. It has now completed 95000 miles and the only failures I have had are the power steering pulley came loose and the turbo pipe split causing black smoke. I have h...
- Wed Sep 03, 2014 3:23 pm
- Forum:E-Type ▸General
- Topic: towing etype v12 roadster
- Replies: 2
- Views: 2206
Re: towing etype v12 roadster
Hi Steve, Somewhere I have seen the answer to this but cannot find it. It involved putting a web sling with two eyes between the bottom front wishbones, joining them in the middle front with a safety hook or similar to form a triangulated shape with the sling, and then connecting the towing strap / ...
- Wed Oct 16, 2013 11:48 am
- Forum:X-Type ▸Suspension
- Topic: New Rear Bushes on FWD car
- Replies: 2
- Views: 3537
Re: New Rear Bushes on FWD car
Update info.
Just done the rear ARB bushes. Very simple after using an easing fluid on the bolts the day before, it's not even necessary to jack up the car to reach them.
Can't understand why the bolts have such small heads (8mm), is this the trend on modern cars or is there a technical reason.
Just done the rear ARB bushes. Very simple after using an easing fluid on the bolts the day before, it's not even necessary to jack up the car to reach them.
Can't understand why the bolts have such small heads (8mm), is this the trend on modern cars or is there a technical reason.
- Wed Oct 16, 2013 11:39 am
- Forum:E-Type ▸General
- Topic: Series 2 number plates
- Replies: 2
- Views: 1518
Re: Series 2 number plates
Hi N
The correct spec for the number plate is silver embossed characters 3 1/4 high on black background with silver border. Plate size is 12 ins by 8 1/2 ins.
I have an oblong plate fitted to my series two but it has to be fitted lower to clear the reversing lights.
Hope this helps.
Roger.
The correct spec for the number plate is silver embossed characters 3 1/4 high on black background with silver border. Plate size is 12 ins by 8 1/2 ins.
I have an oblong plate fitted to my series two but it has to be fitted lower to clear the reversing lights.
Hope this helps.
Roger.
- Wed Sep 18, 2013 9:38 am
- Forum:E-Type ▸Engine
- Topic: Broken Cylinder Head Stud 4.2 engine
- Replies: 10
- Views: 9045
Re: Broken Cylinder Head Stud 4.2 engine
Hi Bob,
The short studs and inserts were done by a previous owner so I cannot help you on this.
Regards
Roger
The short studs and inserts were done by a previous owner so I cannot help you on this.
Regards
Roger
- Fri Sep 06, 2013 4:55 pm
- Forum:E-Type ▸Engine
- Topic: Oil Sump removal on 1968 2+2 4.2
- Replies: 3
- Views: 4102
Re: Oil Sump removal on 1968 2+2 4.2
Hi Kev, My manual says "remove the self locking nut and washer from the top of the engine stabiliser, screw down the lower flanged washer (of the engine stabiliser) to the limit of the thread. Sling the engine from the rear lifting loop and raise the engine approx one inch. Lower front of sump and w...
- Fri Sep 06, 2013 4:47 pm
- Forum:E-Type ▸Engine
- Topic: Broken Cylinder Head Stud 4.2 engine
- Replies: 10
- Views: 9045
Re: Broken Cylinder Head Stud 4.2 engine
Hi Bob, Presumably Jaguar fitted the long studs on the 4.2 as they were unhappy about fitting studs into the top of the block so close to the bores. 3 of mine had been done as you propose in about 2002 and were still OK in 2012 but I made the decision to go back to long studs when I had the recent f...
- Sat Aug 10, 2013 8:53 am
- Forum:E-Type ▸Electrical Problems
- Topic: Electrical coma!
- Replies: 15
- Views: 8266
Re: Electrical coma!
Simon,
I suspect you may have resolved this, but if not my guess would be loose terminals at the battery.
Regards
Roger
I suspect you may have resolved this, but if not my guess would be loose terminals at the battery.
Regards
Roger
- Tue Jul 09, 2013 6:27 pm
- Forum:X-Type ▸Suspension
- Topic: New Rear Bushes on FWD car
- Replies: 2
- Views: 3537
New Rear Bushes on FWD car
Just had my 2006 X Type Sport 2.0D serviced at a Main Dealer. 87k miles. Reports that the rear bushes are worn on Anti Roll Bar and Hub Carriers. Is this is job that can be done by a reasonably accomplished engineer (have and maintain E Type and TR6), and are there any Workshop Manuals available. An...
- Mon Jul 08, 2013 7:02 pm
- Forum:E-Type ▸Brakes
- Topic: Brakes Sticking On (Series II)
- Replies: 2
- Views: 3606
Brakes Sticking On (Series II)
I have read the similar subject for Series 3.
Brakes stay on for about 1 second and seem to release if I blip the throttle.
I am leaning towards the air control valve faulty, or could it be the servo?
Any experience of this problem from other members?
Brakes stay on for about 1 second and seem to release if I blip the throttle.
I am leaning towards the air control valve faulty, or could it be the servo?
Any experience of this problem from other members?