Search found 12 matches
- Thu Mar 03, 2016 11:06 pm
- Forum:X308 ▸Engine
- Topic: Platinum spark plug setting
- Replies: 0
- Views: 1452
Platinum spark plug setting
Hi, can anyone tell me what electrode distance to set on the NGK Platinum spark plugs? They come with a 3,5 mm distance but I have seen in some forums it should be set at 1,3 mm. Which is correct?
- Sun Feb 28, 2016 12:45 pm
- Forum:X308 ▸Engine
- Topic: Fail safe mode
- Replies: 4
- Views: 2880
Re: Fail safe mode
hello, sorry for late reply but car is not used much....to answer one of the questions; yes, it will crank (turn over) but not start. I have changed the gear switch on the transmission but it did not cure it, at least not immediately. I have later changed the fuel pump and that have cured it - at le...
- Sun Mar 01, 2015 2:09 pm
- Forum:X308 ▸Engine
- Topic: Fail safe mode
- Replies: 4
- Views: 2880
Fail safe mode
Hi, just experienced the following: a) car runs fine but won't start again after shutting off. "Fail safe" in dash. b) waited 12 hrs but would still not start, still "fail safe" in dash. c) moved gear selector to Neutral, no "fail safe" in dash and engine will start! d) shut off engine after warming...
- Sun Dec 14, 2014 6:36 pm
- Forum:X308 ▸Electrical
- Topic: Pulsing Lights.
- Replies: 5
- Views: 2813
Re: Pulsing Lights.
Hi guys, tx for all your suggestions. Turned out to be the alternator. New fitted and all OK. Heard from a service tech that I was actually quite lucky as the fluctuating voltage can hit some of the electronics and the complete PCB's out.
- Sun Nov 02, 2014 9:34 pm
- Forum:X308 ▸Electrical
- Topic: Pulsing Lights.
- Replies: 5
- Views: 2813
Re: Pulsing Lights.
Hi, I have exactly the same issue....did you ever get any response on this or got to know the fault?
- Mon Jul 26, 2010 4:05 pm
- Forum:X308 ▸Transmission
- Topic: J-gate lock up
- Replies: 7
- Views: 5355
- Tue Jun 15, 2010 10:18 pm
- Forum:X308 ▸Electrical
- Topic: simultaneous electrical problems...?
- Replies: 1
- Views: 1417
simultaneous electrical problems...?
Hi, see if anyone has an idea on the following: the electric windows, the interior lights, the boot light have all started to fail. On top of this, the J-gate is locked in parked (now driving it with the use of a screwdriver to get in gear). The heat in the climate control has vanished (when setting...
- Tue Jun 01, 2010 9:49 pm
- Forum:X308 ▸Transmission
- Topic: J-gate lock up
- Replies: 7
- Views: 5355
- Fri Apr 30, 2010 9:06 pm
- Forum:X308 ▸Transmission
- Topic: J-gate lock up
- Replies: 7
- Views: 5355
J-gate lock up
HI, what are the possible causes for having the J-gate locked in park? Brake is pressed and brake light comes on but still not possible to move the lever. Any suggestions?
- Sun Jan 25, 2009 11:33 am
- Forum:XJ40 / X300 ▸Bodywork
- Topic: Buying a replacement rear view mirror (X-308, 1998)
- Replies: 3
- Views: 2229
Buying a replacement rear view mirror (X-308, 1998)
Hi, I've been trying to find a replacement rear view mirror somewhere but it seems difficult - any suggestions?
- Sat Mar 01, 2008 10:05 pm
- Forum:X308 ▸Engine
- Topic: Cutting out when releasing throttle at high speed.
- Replies: 0
- Views: 890
Cutting out when releasing throttle at high speed.
Background: When driving on highways at higher speed, and then letting up the accelerator for reduced speed, the engine would go down to idle, regardless if the accelerator was pushed. It would run at idle speed for about 20-30 seconds and then it would be possible to push the throttle again and con...
- Sat Sep 08, 2007 10:40 pm
- Forum:X308 ▸Electrical
- Topic: Body Processing Module and car-alam light dim/on
- Replies: 3
- Views: 1409
Body Processing Module and car-alam light dim/on
Background: I had a very annoying problem in that the car-alarm light sometimes comes on or is dim/flickering. If this happens when the ignition is off, it can make the car impossible to start. If it happens when the engine is on, some strange things happens, like the windshield wiper comes on for o...