Search found 63 matches
- Sun Jul 31, 2022 8:15 am
- Forum:X350 ▸Engine
- Topic: Glow plug diagnosis
- Replies: 1
- Views: 1495
Re: Glow plug diagnosis
Ok, a short update. I managed to track down the glow plug controller it’s on the RHS of the engine attached to a bracket below some sort of vacuum valve. I managed to get a dvm on the controller and ‘think’ it’s ok. I also used the dvm to carry out a basic resistance test on the output wires in the ...
- Fri Jul 22, 2022 8:52 am
- Forum:X350 ▸Engine
- Topic: Glow plug diagnosis
- Replies: 1
- Views: 1495
Glow plug diagnosis
Hi all, My 2.7 X358 is becoming slow to start and I’m getting a P0670 error - which points to the glow plug system somewhere. I think the possible components involved are: 1. Glow plugs 2. Glow plug controller 3. Glow plug fuse 100amp 4. Glow plug relay Anything else? I’m Trying to be methodical and...
- Mon Jul 04, 2022 9:19 am
- Forum:X350 ▸Electrical
- Topic: Earth points - options please
- Replies: 5
- Views: 1944
Re: Earth points - options please
So good news, It was definitely one of the front earth points and me taking the time to clean and expose a decent amount of metal on both sides of the new bolt has made a difference as there is now no issue and I'm a good 400 miles on. Of course I now have a stainless steel bolt running and earthing...
- Wed Jun 29, 2022 12:18 pm
- Forum:X350 ▸Electrical
- Topic: Earth points - options please
- Replies: 5
- Views: 1944
Re: Earth points - options please
Right then.... the sun came out so off I went I decided to back over my previous work and one by one removed: G1, G2,G3, G26 and G30 and in each case attempted to start the car and see what visual error cues I got. It actually didn't take long before I was back at G2 and G3 (front RHS) which I had '...
- Wed Jun 29, 2022 11:19 am
- Forum:X350 ▸Electrical
- Topic: Earth points - options please
- Replies: 5
- Views: 1944
Re: Earth points - options please
Thanks Paul,
Just hit the local halfords and now have (yet another) socket and spanner set, wiring, earth tags, sticky tape (another) multimeter - will brave the elements shortly and investigate further
Just hit the local halfords and now have (yet another) socket and spanner set, wiring, earth tags, sticky tape (another) multimeter - will brave the elements shortly and investigate further
- Wed Jun 29, 2022 6:53 am
- Forum:X350 ▸Electrical
- Topic: Earth points - options please
- Replies: 5
- Views: 1944
Earth points - options please
Morning all, Well after a few months of happy motoring it 'appears' my earthing woes have returned. We were going to drive to reading last weekend (from Calne Wiltshire) got about 2 miles up the road, and the car hesitated and the gearbox warning light came on. We limped back home and went out in my...
- Wed May 11, 2022 12:03 pm
- Forum:X350 ▸Brakes, Hubs & Wheel Bearings
- Topic: Park Brake Fail
- Replies: 12
- Views: 3448
Re: Park Brake Fail
As a follow and closure on this.
I have now had all rear suspension arms replaced and the parking brake actuator done at the same time - all is happiness and light apart from in the bank account department!
I have now had all rear suspension arms replaced and the parking brake actuator done at the same time - all is happiness and light apart from in the bank account department!
- Wed May 11, 2022 9:47 am
- Forum:MK2 ▸Electrics
- Topic: 3.8S Wiring Diagram
- Replies: 2
- Views: 1704
Re: 3.8S Wiring Diagram
Hi Dave,
Thanks for the steer!
I was looking in the workshop manual! Not the handbook
I did have to photograph it and expand in order to read but it's just what I required.
Copy included here for anyone else that requires one (and doesn't have the hand book
Best wishes Steve
Thanks for the steer!
I was looking in the workshop manual! Not the handbook
I did have to photograph it and expand in order to read but it's just what I required.
Copy included here for anyone else that requires one (and doesn't have the hand book
Best wishes Steve
- Tue May 10, 2022 4:38 pm
- Forum:MK2 ▸Electrics
- Topic: 3.8S Wiring Diagram
- Replies: 2
- Views: 1704
3.8S Wiring Diagram
Hi all,
I'm hoping that someone can point me at a resource for a wiring diagram/schematic as the factory service manual appears not to have one
All help gratefully received
Regards
Steve
I'm hoping that someone can point me at a resource for a wiring diagram/schematic as the factory service manual appears not to have one
All help gratefully received
Regards
Steve
- Mon May 02, 2022 3:23 pm
- Forum:XF ▸Engine
- Topic: Jaguar XF 3.0D Cam Belt Change
- Replies: 2
- Views: 4928
Re: Jaguar XF 3.0D Cam Belt Change
Interesting write-up, and always good to share experiences especially where they vary from the,’prescribed method’
- Mon May 02, 2022 3:19 pm
- Forum:MK2
- Topic: I took the plunge - well the engine did!
- Replies: 1
- Views: 1623
Re: I took the plunge - well the engine did!
Well I managed to get the front of the car a foot higher and with the application of a Dremel the speedo cable is off so engine and gearbox are now tucked away until their turn- now no excuses for welding at the front! I think my next step is to construct a more secure platform to hold the car up I’...
- Mon May 02, 2022 10:13 am
- Forum:MK2
- Topic: I took the plunge - well the engine did!
- Replies: 1
- Views: 1623
I took the plunge - well the engine did!
Brief progress update on my 3.8S auto In readiness and out of necessity for repairs to the front of the RH chassis leg, front cross member, braces etc I dropped the engine yesterday. I had previously taken the head off - a story for another day…. As our garage is low roofed so I felt I had little ch...
- Thu Apr 28, 2022 1:47 pm
- Forum:MK2 ▸Bodywork
- Topic: 1966 3.8S Vacuum pipe
- Replies: 8
- Views: 2725
Re: 1966 3.8S Vacuum pipe
yes the list of parts to buy is currently endless.
I'm trying to divide my car into project areas so as not to be overwhelmed by something dismantled never to be re-assembled.
Unfortunately to repair the area of the front chassis that is corroded I need to disassemble quite a bit...
I'm trying to divide my car into project areas so as not to be overwhelmed by something dismantled never to be re-assembled.
Unfortunately to repair the area of the front chassis that is corroded I need to disassemble quite a bit...
- Sun Apr 10, 2022 9:38 am
- Forum:X350 ▸Brakes, Hubs & Wheel Bearings
- Topic: Park Brake Fail
- Replies: 12
- Views: 3448
Re: Park Brake Fail
Hi Paul,
Yes, the parking brake works fine as a recent MOT test revealed.
Yes, the parking brake works fine as a recent MOT test revealed.
- Fri Apr 08, 2022 7:47 am
- Forum:XJS ▸New Arrivals
- Topic: XJR S Sport 1989
- Replies: 4
- Views: 2145
Re: XJR S Sport 1989
I can’t help you with your history questions, but that’s a lovely looking vehicle, I have many fond memories of my XJS - welcome