Many thanks Mike. I will get it checked

Hello all Looking through my paperwork for 2000 3.2 I have a bill from 2008 for can shaft tensioners cam shaft chains cover gaskets cover bolt o rings and seals all done by Lancaster land rover at £1500. I would assume this must mean my car has had the dreaded chain tensioners upgraded and hopefully...

hi Andy

sorry for the delay - just cheap finishers of ebay had to trim driver side pipe a little and got new clips as the ones supplied are terrible!

the look quite good and all for under £30

matt

hi they look nice

I have done some on mine - thought I would share as this thread was about trims!

Hi Guys

following my post on seatbacks I have managed to fit picnic trays and seat backs from an x300 to x308. a bit of fettling but am pleased - cost me £150 quid and some screws and a bit of old foam

I used to take my X308 from Margate to Waltham Abbey because I had been mistreated by a well known Jaguar specialist who tried to sell me a new engine instead of changing the timing chain tensioners. Classic Engineering took the car in and replaced the tensioners and got the engine going again. I g...

anyone know of good specialist in Essex, preferably south end and surrounding? les pauls are great but a bit far away

any assistance would be much appreciated

Matt

hi I found my cover was broken and had been glued to the little sprung plastic arm I have managed to wiggle it out and wondered does the cover just push back in ? the arm looks like it clicks into a small toothed plastic wheel which I assume gives it the spring back, I managed to order a second hand...

many thanks Ian I think you are right you need a complete different seat back and mainly they seem to come from states which means trying to match colour and of course quite expensive to ship! The other thhing they seem to refer to the Vaden plas which i assume might be a uk soveriegn equivakent but...

Hi all new x308 owner here although have had x300 , 2 x xjs and 1 s type so love the Jag! i was going to retrofit picnic trays and couldnt fond a post? i have seen the setabaacks from the states but they appear to be for a 95 vaden plas which looks like an x300? does anyone know if the seatback is a...