Hi Paul,
Many thanks for the info. I note you are at Nantwich so presumably you are a member of the Cheshire region. My name is Howard Briggs and I attend the Cheshire region meetings.
Search found 12 matches
- Sat Sep 28, 2019 11:17 am
- Forum:MK2 ▸Bodywork
- Topic: Mk 2 front quarterlights
- Replies: 3
- Views: 1995
- Fri Sep 27, 2019 6:02 pm
- Forum:MK2 ▸Bodywork
- Topic: Mk 2 front quarterlights
- Replies: 3
- Views: 1995
Mk 2 front quarterlights
The seals on the front quarterlights of my Mk 2 are now past their best. Removing the front quarterlights to change the seals seems straightforward but does anyone know if the seals have to be glued into position and, if so,what is an appropriate adhesive?
Boot Lid
A couple of times recently the boot lid of my Mk2 has dropped on my head whilst I've been putting things in, or taking things out of the boot. Does anyone know if the springs in the hinges which are supposed to hold the boot open can be adjusted to do just that?
Overdrive
I was chatting to a fellow MK2 owner recently who confidently assured me that his overdrive operated on both top and third gear. To the best of my knowledge, no Mk 2 ever did. Anyone know if I am wrong?
- Fri Feb 03, 2017 2:12 pm
- Forum:MK2 ▸Brakes
- Topic: Brake light switch
- Replies: 3
- Views: 3046
Re: Brake light switch
Many thanks for the advice. I am reasonably confident the switch is at fault as, when switching on and depressing the brake pedal, the brake lights work. On subsequent depressions, however, the lights fail to come on until the switch has 'had a rest'. I suppose it could possibly be something in the ...
- Thu Feb 02, 2017 2:50 pm
- Forum:MK2 ▸Brakes
- Topic: Brake light switch
- Replies: 3
- Views: 3046
Brake light switch
The brake light switch on my Mk2 recently gave up the ghost and I need to replace it. I've bought a new one but it didn't come with any gasket or sealing o-ring. Does anyone out there know if there should be one fitted as I don't want to remove the old switch without having all the bits necessary to...
- Sun Oct 02, 2016 8:20 am
- Forum:MK2 ▸General
- Topic: Company recommendation
- Replies: 6
- Views: 2708
Re: Company recommendation
Hi James, Thanks for the advice. I'll certainly have a word with the autoelectrician you mention. My only problem is that, in order to correct the problem, I suspect the steering column will have to be removed, dismantled and refitted so I think I will need a mechanic as well as electrician. I suppo...
- Sat Oct 01, 2016 10:07 am
- Forum:MK2 ▸General
- Topic: Company recommendation
- Replies: 6
- Views: 2708
Re: Company recommendation
Hi James, My Mk 2 has one of those most difficult of problems, an intermittent fault. It will go quite happily for a trip and then park up but when I return to it I only need to switch on the ignition for both horns to start sounding. The only way to stop them is to disconnect the cable which feeds ...
- Wed Sep 14, 2016 12:32 pm
- Forum:MK2 ▸General
- Topic: Company recommendation
- Replies: 6
- Views: 2708
Company recommendation
West Riding Independent Ltd. My 1966 Mk2 needs some attention and, as I live west of Manchester the above company appears the nearest to me. I am, however, reluctant to entrust my car to a company I've not used or had a favourable recommendation for. Has anyone out there had any experience of West R...
- Thu Sep 15, 2011 5:20 pm
- Forum:MK2 ▸Bodywork
- Topic: Re-plating Brightwork
- Replies: 9
- Views: 4270
Re: Re-plating Brightwork
A little over 12 months ago I posted a query asking if anyone knew of a firm I could get the brightwork from my Mk2 replated. (Many thanks to those members who responded). After long (very long) deliberation, largely because of the prices I was quoted, I entrusted the work to Derby Plating Company o...
- Thu Feb 25, 2010 10:34 am
- Forum:MK2 ▸Bodywork
- Topic: Re-plating Brightwork
- Replies: 9
- Views: 4270
Brightwork
Gents, Many thanks for taking the time to respond. Ken Jenkins has recommended one company in Rotherham which, having been in touch, seemed very helpful. The only problem is the three month turn round time (they are obviously very busy). But I will speak to Derby Plating (thanks Neil) and see what t...
- Mon Feb 22, 2010 3:32 pm
- Forum:MK2 ▸Bodywork
- Topic: Re-plating Brightwork
- Replies: 9
- Views: 4270
Re-plating Brightwork
Can anyone recommend a company which will replate the brightwork on my Mk2 to a good standard? I live between Liverpool and Manchester so somewhere in the North-West would be ideal.